Audited Supplier
DC13 076A
Spare Parts Warranty
Spare Parts Warranty
Electric Ignition
High Speed
Water-Cooled
Naturally Aspirated
Rotary
Diesel
Four-Stroke
R
4-Cylinder
Electric Motor
Construction Engineering
Diesel Engine
Scania
24 Hours Online
Scania
Wooden Case
China
Product Description
Scania DC13 engine is mainly used in construction machinery such as excavators and loaders. The DC13 engine has a displacement of 13 liters and can meet the European 4-stage and US 4F non road emission standards.
It uses Scania's engine management system EMS, ultra-high pressure fuel injection system XPI, variable cross-section turbocharger VGT, and exhaust gas recirculation system EGR, greatly improving the fuel economy and performance of this engine.
| No of cylinders | 6 in-line |
| Working principle | 4-stroke |
| Firing order | 1 - 5 - 3 - 6 - 2 - 4 |
| Displacement | 12.7 litres |
| Bore x stroke | 130 x 160 mm |
| Compression ratio | 17.3:1 |
| Weight | 1050 kg (excl oil and coolant) |
| Piston speed at 1500 rpm | 8.0 m/s |
| Piston speed at 1800 rpm | 9.6 m/s |
| Camshaft | High position alloy steel |
| Pistons | Steel pistons |
| Connection rods | I-section press forgings of alloy steel |
| Crankshaft | Alloy steel with hardened and polished bearing surfaces |
| Oil capacity | 34-45 dm3 |
| Electrical system | 1-pole 24V |
The industrial engines from Scania are based on a robust design with a strength optimised cylinder block containing wet cylinder liners that can easily be exchanged. Individual cylinder heads with 4 valves per cylinder promotes reparability and fuel economy.
The engine is equipped with a Scania developed Engine Management System, EMS, in order to ensure the control of all aspects related to engine performance.The injection system is based on electronically controlled unit injectors that give low exhaust emissions with good fuel economy and a high torque. The engine can be fitted with many accessories such as air cleaners, PTOs and flywheels in order to suit a variety of installations.Standard Equipment
• Scania Engine Management System, EMS
• Unit injectors, PDE
• Turbocharger
• Saver ring in cylinder liner
• Fuel filter and extra pre-filter
with water separator
• Oil filter, full flow
• Centrifugal oil cleaner
• Oil cooler, integrated in cylinder block
• Oil filler, in valve cover
• Deep front oil sump
• Oil dipstick, in cylinder block
• Magnetic drain plug for oil draining
• Starter motor, 1-pole 6.0 kW
• Alternator, 1-pole 100 A
• Flywheel, for use with friction clutch
• Silumin flywheel housing, SAE 1 flange
• Front mounted engine suspension
• Open crankcase ventilation
