Audited Supplier
The EnviteC OOM202 Oxygen Sensor is a highly accurate and reliable sensor designed for use in medical applications where precise oxygen concentration measurements are required. This sensor is particularly suitable for oxygen analyzers, offering exceptional performance in a wide range of devices, including oxygen concentrators, medical ventilators, anesthesia equipment, and incubators.
Manufactured in Germany, the OOM202 sensor adheres to stringent industry standards, including ISO 80601-2-55 and EN ISO 13485, ensuring high quality and reliability. It is compliant with European MDD (CE certified) and has been cleared by the FDA, making it a trusted choice for medical professionals worldwide.
Key features of the OOM202 Oxygen Sensor include:
- Wide measurement range: It accurately measures oxygen levels from 0% to 100% at atmospheric pressure.
- Fast response time: The sensor reaches 90% of its final value in under 12 seconds, ensuring rapid feedback in dynamic environments.
- Long sensor life: With a nominal lifetime of over 1,000,000 hours of oxygen exposure, the OOM202 is designed for long-term, reliable use.
- Built-in temperature compensation: An integrated NTC compensation system minimizes the influence of temperature variations, ensuring stable performance across a wide temperature range (0°C to +50°C).
- Low maintenance: The sensor exhibits a low long-term output drift, typically less than 1% oxygen volume per month, reducing the need for frequent recalibration.
- Excellent resistance: The sensor is resistant to Nitrous Oxide (N2O) and other environmental influences such as humidity and mechanical shock, making it suitable for various medical and industrial environments.
The OOM202 sensor is designed to be integrated easily into existing oxygen monitoring systems. Its 3-pin electrical interface (Molex® 22-11-1031) ensures compatibility with most systems. Additionally, the sensor offers high stability, excellent signal quality, and a broad operational range, making it an ideal choice for system monitoring in medical applications.
For further customization, EnviteC's engineering team can work with clients to design sensors tailored to specific requirements, such as varying signal levels or the addition of extra temperature compensation elements.
This sensor is available through EnviteC's website, and detailed product documentation, including instructions for use and the EnviteC XRL Cross Reference List, can be downloaded for easy integration into any system.
Made in Germany and supported by a globally recognized company, the OOM202 Oxygen Sensor is a reliable and high-quality solution for precise oxygen measurement in critical medical applications.
| Parameter | Specification |
| Measurement Range | 0% to 100% oxygen (at atmospheric pressure) |
| Nominal Sensor Lifetime | ≥ 1,000,000 % volume oxygen hours |
| Output in Ambient Air | 13 mV to 16 mV |
| Electrical Interface | 3-pin (Molex® 22-11-1031) |
| Accuracy | Meets ISO 80601-2-55 requirements |
| Repeatability | < 1% volume O2at constant temperature and pressure |
| Linearity Error | < 3% relative |
| Response Time | < 12 seconds to 90% of final value |
| Zero Offset Voltage | < 200 μV in 100% nitrogen, applied for 5 minutes |
| Cross Interference | Meets ISO 80601-2-55 requirements |
| Humidity Influence | -0.03% relative per % RH at 25°C |
| Pressure Range | 0.6 bar to 2 bar (ppO2 0 to 1250 mbar O2) |
| Pressure Influence | Proportional to change in oxygen partial pressure |
| Mechanical Shock Influence | < 1% relative after a fall from 1 meter |
| Operating Temperature | 0°C to +50°C |
| Temperature Compensation | Built-in NTC compensation |
| Effect of Temperature Compensation | 3% relative error between +25°C and +40°C; 8% relative error between 0°C and +50°C |
| Operating Humidity | 0% to 99% RH (non-condensing) |
| Long-Term Output Drift | < 1% volume oxygen per month, typically < -15% relative over lifetime |
| Storage Temperature | -20°C to +50°C |
| Recommended Storage Temperature | +5°C to +15°C |
| Recommended Load | ≥ 10 kOhms |
| Warm-up Time | < 30 minutes after sensor replacement |
| Weight | Approximately 28 grams |
| Part Number | 01-00-0047 |
