Audited Supplier
SPO93-50
Online Technical Support
1 Year
ISO13485:2016
Low
220V
91%-95%
Oxygen Generator
Customised
5-2000 Nm3/H
0.01~0.4PPA(Adjustable)
Automation
tuowei
According to Your Requirements
3200*1700*2200mm
8421399090
Product Description
1.Specification of PSA oxygen generator| oxygen capacity | 5-200 Nm3/h |
| oxygen purity | 93%±2 |
| output pressure | 0.3-0.6MPa(3-6Bar) adjustable 15MPa or 20Mpa filling pressure offered |
| Model | O2 flow | O2 purity | O2 outlet pressure | Motor power of matching screw air compressor | Air consumption |
| m3/h | % | bar | kW / 8bar | ≥ m3/min | |
| SPO93-5 | 5 | 93±2 | 3-6 (inlet compressed air at 8bar) | 7.5 | 1.08 |
| SPO93-10 | 10 | 15 | 2.17 | ||
| SPO93-20 | 20 | 30 | 4.33 | ||
| SPO93-30 | 30 | 45 | 6.5 | ||
| SPO93-40 | 40 | 55 | 8.7 | ||
| SPO93-50 | 50 | 75 | 10.83 | ||
| SPO93-60 | 60 | 90 | 13 | ||
| SPO93-70 | 70 | 90 | 15.17 | ||
| SPO93-80 | 80 | 110 | 17.33 | ||
| SPO93-90 | 90 | 110 | 19.5 | ||
| SPO93-100 | 100 | 132 | 21.7 | ||
| SPO93-120 | 120 | 160 | 26 | ||
| SPO93-150 | 150 | 220 | 32.5 | ||
| SPO93-180 | 180 | 250 | 39 | ||
| SPO93-200 | 200 | 250 2-stages compression | 43.3 |
Oxygen Equipment working principle: The use of molecular sieve physical adsorption and desorption technology. The oxygen-making machine is filled with molecular sieve, which can adsorb nitrogen in the air when it is pressurized. The remaining non-absorbed oxygen is collected and purified to become high-purity oxygen. When the molecular sieve is decompressed, the adsorbed nitrogen is discharged back into the ambient air, and when the next pressure is applied, the nitrogen can be adsorbed and oxygen can be produced. The medical oxygen-producing equipment adopts the world advanced PSA (pressure swing adsorption) air separation and oxygen-producing technology, which realizes the separation of oxygen and nitrogen based on the difference of the adsorption ability of the adsorbent (zeolite molecular sieve) to the oxygen and nitrogen in the air. When the air enters the bed which contains the adsorbent, the nitrogen adsorption ability is strong, but the oxygen is not adsorbed, thus may obtain the high density oxygen at the adsorption bed outlet. Because the adsorbents have the characteristic that the amount of adsorbents changes with the pressure, the adsorption and desorption can be carried out alternately by changing the pressure.
3.Oxygen Generator Technical Features1).Full Automation
All systems are designed for un-attended operation and automatic oxygen demand adjustment.
2).Lower Space Requirement
The design and Instrument makes the plant size very compact,assembly on skids,prefabricated from factory.
3).Fast Start-up
Start-up time is only 5 minutes to get desired oxygen purity.So these units can be switched ON&OFF as per Nitrogen demand changes.
4).High Reliabiity
Very reliable for continuous and steady operation with constant oxygen purity.Plant availability time is better than 99% always.
5).Molecular Sieves life
Expected Molecular sieves life is around 15-years i.e. whole life time of oxygen plant.
6).Adjustable
By altering flow,you can deliver oxygen with precisely the right purity
FAQHow to get a prompt quotation of Oxygen Generator?
Oxygen flow rate: _____Nm3/hr( or How many cylinders do you want to fill per day(24hours))
Oxygen purity: _____%
Oxygen discharge pressure: _____Bar
Voltages and Frequency : ______V/PH/HZ
