Audited Supplier
SQM10.16502
Industrial Gas Burner
ISO, CE
New
Low
Damper Actuator
Control Gas
Sqm10.16502
Damper Actuators
AC 230 V -15%/+10%
50…60 Hz ±6%
IP66
Siemens
Optional
Video Technical Support
Gas Burner Accessories
Hydrogen, Nitrogen, Ng and LPG
Medium
Siemens
Carton
23*19*11cm
Germany
8412291000
Product Description
OR Siemens SQM10.16502 Servo Motor Damper Actuator For Industrial Gas Burners
PRODUCT SPECIFICATIONS
Mechanical Design:
Function:
The function of the actuator: - Pressure and heat resistant plastic housing design - Screw terminals - Maintenance-free gear
mechanism with clutch - Built-in positioning markers - Easy-to-adjust limit switches and auxiliary switches - Integrated circuit
loop
mechanism with clutch - Built-in positioning markers - Easy-to-adjust limit switches and auxiliary switches - Integrated circuit
loop
PRODUCT SPECIFICATIONS
Model | SQM10.16502 |
Adapter Burner | Oil,Gas,Belden Sweden |
Weight | Less 2.5kg |
Usage | Gas burner accessories |
OR Siemens SQM10.16502 Servo Motor Damper Actuator For Industrial Gas Burners
Use And Features:
The SQN7…actuator is specially designed to actuate gas fuel valves and dampers for small to medium fuel or Gas burner. So as to achieve the best mixing ratio of fuel and combustion air. - Connection with P-PI or PID controllers, e.g. RWF40… - Direct
connection of different types of combustion controllers, such as LOA.., LMO…, LMG… or LFL… - Connection with 1 or 2 wire
controller or 3 position controllerElectric actuator for damper flaps and gas or oil valve control of small to medium burners. SQN7…especially suitable for combining this actuator with its products OEM manufacturers!
• Holding torque: - SQN70... / SQN71... / SQN75... 0.7...1.3 Nm - SQN74... 0.7 Nm • Run time: - SQN70... / SQN71... / SQN75...
4...30 s - SQN74...4s
• Direction of rotation:- SQN70... / SQN74... counterclockwise - SQN71... / SQN75... Clockwise • SQN74... /
SQN75... - fixing holes and cable entry holes
connection of different types of combustion controllers, such as LOA.., LMO…, LMG… or LFL… - Connection with 1 or 2 wire
controller or 3 position controllerElectric actuator for damper flaps and gas or oil valve control of small to medium burners. SQN7…especially suitable for combining this actuator with its products OEM manufacturers!
• Holding torque: - SQN70... / SQN71... / SQN75... 0.7...1.3 Nm - SQN74... 0.7 Nm • Run time: - SQN70... / SQN71... / SQN75...
4...30 s - SQN74...4s
• Direction of rotation:- SQN70... / SQN74... counterclockwise - SQN71... / SQN75... Clockwise • SQN74... /
SQN75... - fixing holes and cable entry holes
Housing - composed of pressure and heat resistant plastic housing - Inside includes: - Geared synchronous motor with geared clutch - The camshaft of the control section
- Relays, depending on the type of driver
- Switches, connected to terminals on the printed circuit board
Colour: SQN70... / SQN71...: Gearbox housing in black grey, cover in bright grey SQN74... / SQN75...: Gearbox
housing in black, cover in black
housing in black, cover in black
Drive Motor - Bidirectional Rotary Synchronous Motor
Coupling - The drive shaft can be manually disengaged from the gear train and motor - Automatic engagement
Switch Adjustment - Using Adjustable Cam - The scale on the side of the cam indicates the angle of the cam switching point - The cam runs to the end, the auxiliary switch is color-coded - Some cam switches can be finely adjusted, just use a common screwdriver - Other cams can be adjusted manually or with a special wrench or similar
Position Indication - Built-in: Marked at the beginning of one end of the gear mechanism Electrical connection - see «Technical data»
Gear mechanism - maintenance free
Drive Shaft - Constructed from black wrought steel
- Fits smoothly with the front end of the transmission mechanism - Different versions to choose from
Mounting and Mounting - Front end of transmission as mounting surface - Easy and reliable installation through mounting holes
OR Siemens SQM10.16502 Servo Motor Damper Actuator For Industrial Gas Burners
