0.37KW-2.2KW 0.5HP-3HP Electric Centrifugal Water Pump (CPM 146 CPM158 CPM180 CPM190 CPM200)

CPM Series Centrifugal Pump
CPM Series Centrifugal Pumps are single stage centrifugal pumps, can be used to transfer clean water or other similar water in physical and chemical properties.
It is suitable for industrial use and urban water supply, pressure boosting for high buildings and fire system , garden irrigation, long-distance water transfer, heating ventilation and air controlling, circulation and pressure boosting for cold and hot water, and supporting equipment etc.
 
 Application:                  
Clean water without abrasive particles/Non-aggressive liquid.
Domestic use.
In particular for deliverying water in combination with small pressure sets and for irrigation.
Installed in enclosed place, or at least protected against inclement weather.

Operating Conditions:      
Suction lift up to 9mt
Liquid Temperature up to +40ºC
Ambient temperature up to +40ºC
Max. working Pressure: 6 bar

Motor:                           
2 pole induction motor
Single-phase, 50/60Hz
Protection IP 44
With capacitor and thermal overload protection

Material:                        
Pump body: Cast Iron
Motor Support: Aluminum/Cast Iron
Impeller: Brass
Motor Shaft: Stainless Steel or CS45#
Mechanical Seal: Ceramic-Graphite.
Motor winding: copper

CPM PUMP EXPLODED VIEW


 

CPM PUMP CURVING



Packing & Shipping :

To avoid damp, inner layer wrapped with plastic paper
To lessen vibration, middle layer filled with foam
To avoild squeeze, motor are packed with plywood or wooden case
Customized package is also accept