Swipe or use the arrows to view product images.
100% Solid Rigid Hot Spray Polyurea Coating for Foam Sculpture
| Price | $5.50 |
|---|---|
| Min Order | 840 kg |
| Availability | In Stock |
| Shipping From | Shandong, China |
| Popularity | 433 people viewed |
Model NO.:
JHSW-8616
CAS No.:
Compound
Formula:
Polyurea
Color:
Optional
Appearance:
Liquid
Method:
Spray
Certification:
ISO14001, RoHS, ISO9001
Substrate:
Steel
Components:
Film Forming Matter
Formation Mechanism:
Conversion Type
Trademark:
polysv
Transport Package:
200L Drum
Specification:
A side 220 kg, B side 200 kg
Origin:
Qingdao, China
HS Code:
3909301000
Product Description
Advantages:
- Fast cure, short down time, no sagging
- 100% Solids, No VOC's, Odorless, No Toxic Vapors
- Good resistance to a wide range of chemical attack
- High impact and Abrasion Resistance
- Good weather ability
- High hardness, better protective for foam sculptures.
JHSW8616 100% Solid Rigid Hot Spray Polyurea Coating for Foam Sculpture can be widely used for protection of the foam sculptures, it will make the foam sculpture better impact resistance, anti-abrasion, and scratch resistant.
Properties:
| Tensile Strength /MPa | ≥20 | Solids Content/% | 100 |
| Elongation/% | ≥50 | VOC | 0 |
| Tear Strength/( N/mm) | ≥70 | Gel Time/s | 11-13 |
| Shore Hardness | ≥55D | Tack Free/ s | 20~30 |
| Adhesion /(Pull off, concrete,MPa) | ≥2.5 | Shelf Life | 12 months, unopened at 0~40 ºC |
| Density/( g/cm3) | 0.95~1.05 | Flash Point/ ºC | >100 |
| Abrasion Resistance /(GB/T 1689-1998, cm3/1.61km, g) | ≤0.04 | Mix Ratio V/V | 1: 1 |
| Impermeability(0.3MPa/30min) | Impervious | Recommended Spreading Thickness/mm | 2~3 |
| Chemical Resistance | No corrosion, No Blister, No Spalling | Colors: | Optional |
- Similar Products