Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Products > Industrial Equipment & Components > Pump & Vacuum Equipment > Centrifugal Pump
Swipe or use the arrows to view product images.

30dsb Water Pump Horizontal Water Pumps Small Water Pump Volute

Price $169.00
Min Order 1 Piece
Availability In Stock
Shipping From Shanghai, China
Popularity 424 people viewed
Send Inquiry View Full Page
Model NO.:
QDWF2-60
Max.Head:
>150m
Max.Capacity:
>400 L/min
Driving Type:
Motor
Impeller Number:
Multistage Pump
Working Pressure:
High Pressure Pump
Influent Type of Impeller:
Single Suction Pump
Position of Pump Shaft:
Vertical Pump
Pump Casing Combined:
Verticaljoint Surface Pump
Mounting Height:
Since Irrigation Centrifugal Pumps
Impeller:
Closed
Usage:
Pump, Pumps, Condensate Pump, Circulating Pump
Color:
Silver
Certificate:
ISO9001 Ce
Warranty:
1 Year
Material:
Stainless Steel
Motor:
100% Copper Wire
Voltage:
220V/380V
Feature:
High Flow
Type:
Watering
Name:
DC Pump
Product Name:
Electric Water Pump for Agriculture Use
Trademark:
LYSON
Transport Package:
Wooden Box
Specification:
80Kg
Origin:
Shanghai
HS Code:
8413709110
Product Description

Product details




 

Performance curve:


All performance curves are based on the measured values when a motor works under power of 380V, at a constant speed of 2900r/min.
The capability of flow and head conforms to ISO9001.
Measurement is done in 20oC air-free water of which viscosity is 1mm2/s.

The operation of pump shall refer to the performance range marked in thickened curve so as to avoid damages caused by over-load.

fault phenomenonfailure causeelimination methods
 1.No power supply or one or two phase power supply is needed 
Check all phases of power supply and restore power supply
 
 
 2.Poor contact of ac contactor and burning of coil 
Repair or replace contactors
 
 
can not start3.
The power switch is not closed, malfunction or damaged
 
 		Close the switch and replace it if the power indicator does not turn on
 4.
Thermal relay trip or damage
 
 		Check whether the motor is blocked, find out the reason and eliminate it.Manual reset is replaced if it cannot be started
 Water level is too low 
Put water in the sink
 
 
 The motor burned 
Repair or replace the motor
 
 
 1.Line is loose 
Check wiring and tighten connectors
 
 
 2.Frequency converter malfunctionCheck the fault content, check the cause according to the frequency converter manual, and restart after reset.Or disconnect the inverter power supply for a few seconds, the inverter fault reset before starting.
The manual is normal3The frequency converter is damagedRepair or replace
Automatic transmission failure4.Pressure switch damageRepair or replace
 5The pressure transmitter is damagedRepair or replace
 6.Switch failureRepair or replace
Pump non - suction pressure gauge pointer to beat violentlyInsufficient water supply for perfusion, air leakage at the connection between pipeline and instrumentCheck pipeline and bottom valve, refill water diversion. Tighten air leakage
 
The pump consumes too much power
 
 		 
Too much flow, impeller wear
 
 		Check whether the pump shaft is bent, replace the impeller, close the outlet valve to reduce the flow

Related products




Company Information

♦ ESTABLISHED IN THE SIXTIES


♦ ONE OF THE FIRST THROUGH THE ISO9001:2008 DOMESTIC,

INTERNATIONAL QUALITY SYSTEM CERTIFICATION


♦ SILVER MEDAL WAS AWARDED AT THE NATIONAL CONFERENCE ON THE

APPLICATION OF SPARK CUP TECHNOLOGY


♦ WIN THE NATIONAL AWARD FOR EXCELLENCE IN CIVILIZATION COMPETITION 


♦ GET THE LC OF THE CHINESE GOVERNMENT
 


Certification




Transportation

FAQ


  • Similar Products
Full Page Contact Supplier
↑