Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

50W 100W 150W SMD Integrated Modern Smart IP65 Public Outdoor Light 50W 60W LED Street Light Die Casting Aluminum LED Street Lamp

Price $36.48
Min Order 5 Pieces
Availability In Stock
Shipping From Zhejiang, China
Popularity 519 people viewed
Model NO.:
SLR29-60W
Light Source:
LED Light
Color Temperature(CCT):
Cool White
Lamp Body Material:
Aluminum
Lamp Power:
60W
Power Supply:
AC
Average Life:
>50000h
Application:
Highway, Square, Garden
IP Rating:
IP66
Certification:
CE, RoHS
Voltage:
100-277V
Power Efficiency:
>0.90
Color Temperature:
4000K
Warranty:
5 Years
CRI:
>70
LED Qty:
96/36
Lens:
4
Lumen:
130-160lm/W
Trademark:
sunle
Specification:
60*27*9cm
Origin:
Ningbo
Product Description
Model NO.Power(W)Light SourceLED QTY (PCS)Lens(PCS)CCT(K)Lumen
(lm/W)
CRI
R29-13-30W303030(5050)64/2444000k130/160>70
R29-13-40W403030(5050)64/2444000k130/150>70
R29-15-50W503030(5050)96/3664000k130/160>70
R29-15-60W603030(5050)96/3664000k130/150>70
R29-110-80W803030(5050)144/5494000k130/160>70
R29-110-100W1003030(5050)144/5494000k130/160>70
R29-110-120W1203030(5050)144/7294000k130/160>70
R29-115-150W1503030(5050)256/96164000k130/160>70
R29-115-200W2003030(5050)256/96164000k130/160>70
R29-125-200W2003030(5050)320/120204000k130/160>70
R29-125-240W2403030(5050)384/144244000k130/160>70

Application site

City road / tunnel lighting 
Commercial lighting control 
Solar street smart lighting control
Features
IP66 waterproof/dust proof/explosion proof/IK09

Aluminum shape good at heat dissipation
The lamp post can be adjusted to plus or minus 15 degrees
It can also be installed vertically
SMD 3030/ 5050/ Ra>70/SDCM<6
100,000 times switching cycle before failure
Total harmonic distortion(THD)<10%
Excellent post light control design, the whole lamp can achieve T II-M, T III-M,That's our advantage
Pass 3G vibration test
Advantage
Easy to install
Strong system expansion ability and increase sensor devices
Low power consumption, large capacity , high stability

Matters needing attention 
Before installing the lighting fixtures, please read this instruction manual carefully. 
The lighting fixtures should be installed, connected and tested by a certified electrician based on the local regulations. 
Lamps should always be installed or replaced carefully. 
Please check the local voltage in accordance with the product requirements before installation. 
Revamping only can be done when the power is off and the lamp is completely cooled down. 
When clean the lamp, make the power off and let it cool down completely, clean the fixture with a soft cloth and a standard PH neutral detergent, stainless steel should be maintained regularly. 
Don't cover the fixtures with flammable materials. 
Replace should be made by the manufacturer or his service agent or certified electrician in order to avoid a hazard.
  • Similar Products
Full Page Contact Supplier