Audited Supplier
SLR29-60W
LED Light
Cool White
Aluminum
60W
AC
>50000h
Highway, Square, Garden
IP66
CE, RoHS
100-277V
>0.90
4000K
5 Years
>70
96/36
4
130-160lm/W
sunle
60*27*9cm
Ningbo
Product Description
| Model NO. | Power(W) | Light Source | LED QTY (PCS) | Lens(PCS) | CCT(K) | Lumen (lm/W) | CRI |
| R29-13-30W | 30 | 3030(5050) | 64/24 | 4 | 4000k | 130/160 | >70 |
| R29-13-40W | 40 | 3030(5050) | 64/24 | 4 | 4000k | 130/150 | >70 |
| R29-15-50W | 50 | 3030(5050) | 96/36 | 6 | 4000k | 130/160 | >70 |
| R29-15-60W | 60 | 3030(5050) | 96/36 | 6 | 4000k | 130/150 | >70 |
| R29-110-80W | 80 | 3030(5050) | 144/54 | 9 | 4000k | 130/160 | >70 |
| R29-110-100W | 100 | 3030(5050) | 144/54 | 9 | 4000k | 130/160 | >70 |
| R29-110-120W | 120 | 3030(5050) | 144/72 | 9 | 4000k | 130/160 | >70 |
| R29-115-150W | 150 | 3030(5050) | 256/96 | 16 | 4000k | 130/160 | >70 |
| R29-115-200W | 200 | 3030(5050) | 256/96 | 16 | 4000k | 130/160 | >70 |
| R29-125-200W | 200 | 3030(5050) | 320/120 | 20 | 4000k | 130/160 | >70 |
| R29-125-240W | 240 | 3030(5050) | 384/144 | 24 | 4000k | 130/160 | >70 |
Application site
City road / tunnel lighting
Commercial lighting control
Solar street smart lighting control
Features
IP66 waterproof/dust proof/explosion proof/IK09
Aluminum shape good at heat dissipation
The lamp post can be adjusted to plus or minus 15 degrees
It can also be installed vertically
SMD 3030/ 5050/ Ra>70/SDCM<6
100,000 times switching cycle before failure
Total harmonic distortion(THD)<10%
Excellent post light control design, the whole lamp can achieve T II-M, T III-M,That's our advantage
Pass 3G vibration test
Advantage
Easy to install
Strong system expansion ability and increase sensor devices
Low power consumption, large capacity , high stability
Matters needing attention
Before installing the lighting fixtures, please read this instruction manual carefully.
The lighting fixtures should be installed, connected and tested by a certified electrician based on the local regulations.
Lamps should always be installed or replaced carefully.
Please check the local voltage in accordance with the product requirements before installation.
Revamping only can be done when the power is off and the lamp is completely cooled down.
When clean the lamp, make the power off and let it cool down completely, clean the fixture with a soft cloth and a standard PH neutral detergent, stainless steel should be maintained regularly.
Don't cover the fixtures with flammable materials.
Replace should be made by the manufacturer or his service agent or certified electrician in order to avoid a hazard.
