600V Copper /Aluminum Alloy Conductor XLPE Insulation Double PVC Sheath Unshielded Armoured Power Cable Teck 90 Lighting Control Signal Cable

Application:

• Industrial
• Industrial Construction/Automation
• Mining
• Petrochem/Pulp & Paper
• Water/Waste Water Treatment

Unshielded armoured power cable is used to supply power for lighting, drives, motors and pumps. Interlocked armour replaces the use of conduit for mechanical protection. Cable can be directly buried, installed in raceways, including cable tray in wet or dry environments. Cable is suitable for use in outdoor exposed applications and is rated for damp or dry locations in -40°C (-40°F) environments.

VOLTAGE

1000 V

Optional: 600V

PRODUCT CONSTRUCTION

• Insulation:
  • XLPE (RW90 rated) rated: 90°C wet / dry
• Armour:
  • Aluminum Interlocked Armour (AIA) (standard)
  • Steel Interlocked Armour (SIA) (optional)
• Jacket:
  • FR LAG PVC (AG14 rated) inner / outer black jacket rated: 90°C to -40°C
• Available in:
  • Variable Frequency Drive (VFD)
  • Verlock® (for mineshaft applications)
  • Custom colour coding
  • Custom insulation / jacket colours
  • Composite constructions
  • Aluminum conductors

CERTIFICATIONS/COMPLIANCES

• CSA C22.2 NO. 131, Teck 90 Cables (Teck 90)
• CSA C22.2 NO. 174, Cables & Cable Glands for use in Hazardous Locations
• CSA C22.2 NO. 38, Thermoset Insulated Wires & Cables (XLPE)
• CSA FT4, UL 1685 FT4, Vertical Tray Flame Test rated
• IEEE 383 & 1202 (70,000 BTU / hr), Vertical Flame Test rated
• ICEA T-30-520 (70,000 BTU / hr), Vertical Flame Test rated
• XLPE (RW90 rated), 90°C wet / dry
• UV sunlight resistant SUN RES (all colours)
• Direct burial rated
• -40°C cold bend / impact rated
• HL rated for use in hazardous locations:
  • Class I Zone 0 (Intrinsically Safe cables only)
  • Class I Zone 1 (Div 1)
  • Class I Zone 2 (Div 2)
  • Class II Zone 20, 21 (Div 1)
  • Class II Zone 22 (Div 2)

COLOUR CODING

• 2C Black & white
• 3C Black, red & blue
• 4C Black, red, blue & white
• 5C to 50C Black # coded