Swipe or use the arrows to view product images.
6150 BS970 En47 DIN1.8519 50CRV4 Spring Steels Strip
| Price | $5000.00 |
|---|---|
| Min Order | 1 Ton |
| Availability | In Stock |
| Shipping From | Hunan, China |
| Popularity | 445 people viewed |
Model NO.:
6150
Standard:
ASTM
Composition:
Ferrous Steel Scrap
Technique:
Forged
Shape:
Round, Square, Flat
Surface Treatment:
Black, Grinded, Peeled, Polished, Rough Turned
Special Use:
Mold Steel
Application:
Structural Steel Bar
Similar Grades:
50CRV4, DIN 1.8519, BS970, En 47.
Size Range:
Diameter: 20-480mm
Delivery Condition:
Annealed, Qunched and Tempered
Surface Condition:
Black, Grinded, Peeled, Polished
Trademark:
FUSHUN
Transport Package:
Apply The Shipping Packing
Specification:
Diameter: 20-480mm
Origin:
Hubei, Huangshi
HS Code:
7228600000
Product Description
Similar Grades:
DIN1.8519, 50CrV4,BS970,EN47
Shape:
Round, Flat, Square.
Size Range:
Steel-making Condition:
EF, EF/EAF+LF+VD, EF/EAF+ESR
Delivery Condition:
Annealed , Quenched + Tempered
Surface Condition:
Black, Grinded, Peeled, Rough turned, Polished
Features:
1.Competitive price
2.Immediate delivery
3.Premium quality
4.Reliable service
5.MOQ: 1 Ton
Chemical Composition:
Heat Treatment:
Forging: Preheat carefully, then raise temperature to 1050°C for forging. Do not forge below 840°C. After forging cool slowly in a furnace.
Annealing: Heat slowly to 820-840°C, soak well and cool slowly in a furnace.
Hardening: Heat slowly to 650-700°C and thoroughly soak. Continue to heat the 6150 steel to the final hardening temperature of 830-860°C and allow to be heated through. Oil quench.
Tempering: Temper 6150 spring steel immediately after hardening whilst tools are still hand warm. Re-heat to the tempering temperature then soak for one hour per 25 millimetre of total thickness (2 hours minimum) Cool in air. Tempering of this grade will be between 400-600°C for most applications.
Introduction:
The 6150 Spring Steels receive their special characteristics through quenching and tempering.
The processors need to make sure that their calculation method, design technique and processing procedure are aligned with the material. Precise temperature control is crucial for the part's characteristics.
Therefore, the temperature needs to be adjusted according to the respective purpose of the material.
Applications:
Used widely in the motor vehicle industry AISI 6150 spring steels is suitable for many general engineering applications that require high tensile strength and toughness. Typical applications include crankshafts, steering knuckles, spindles, pumps and gears.
Contact Information:
FUSHUN SPECIAL STEEL CO., LTD.
Website: fushunmetal.en.made-in-china.com
DIN1.8519, 50CrV4,BS970,EN47
Shape:
Round, Flat, Square.
Size Range:
| Diameter(mm) | Thickness (mm) | Width (mm) | Length(mm) | |
| Round | 20-480 | - | - | 2000-5800 |
| Square | 20-480 | - | - | 2000-5800 |
| flat | - | 20-50 | 80-600 | 2000-5800 |
Steel-making Condition:
EF, EF/EAF+LF+VD, EF/EAF+ESR
Delivery Condition:
Annealed , Quenched + Tempered
Surface Condition:
Black, Grinded, Peeled, Rough turned, Polished
Features:
1.Competitive price
2.Immediate delivery
3.Premium quality
4.Reliable service
5.MOQ: 1 Ton
| Packing details | In seaworthy packing, as your requirement. |
| Delivery details | within 30-50 days |
Chemical Composition:
C | Mn | P | S | Si | Cr | V |
| 0.48-0.53 | 0.70-0.90 | 0.035max | 0.040max | 0.15-0.35 | 0.90-1.10 | 0.15min |
Heat Treatment:
Forging: Preheat carefully, then raise temperature to 1050°C for forging. Do not forge below 840°C. After forging cool slowly in a furnace.
Annealing: Heat slowly to 820-840°C, soak well and cool slowly in a furnace.
Hardening: Heat slowly to 650-700°C and thoroughly soak. Continue to heat the 6150 steel to the final hardening temperature of 830-860°C and allow to be heated through. Oil quench.
Tempering: Temper 6150 spring steel immediately after hardening whilst tools are still hand warm. Re-heat to the tempering temperature then soak for one hour per 25 millimetre of total thickness (2 hours minimum) Cool in air. Tempering of this grade will be between 400-600°C for most applications.
Introduction:
The 6150 Spring Steels receive their special characteristics through quenching and tempering.
The processors need to make sure that their calculation method, design technique and processing procedure are aligned with the material. Precise temperature control is crucial for the part's characteristics.
Therefore, the temperature needs to be adjusted according to the respective purpose of the material.
Applications:
Used widely in the motor vehicle industry AISI 6150 spring steels is suitable for many general engineering applications that require high tensile strength and toughness. Typical applications include crankshafts, steering knuckles, spindles, pumps and gears.
Contact Information:
FUSHUN SPECIAL STEEL CO., LTD.
Website: fushunmetal.en.made-in-china.com
- Similar Products