6700m3/H Vertical Drainage Pump/Vertical Turbine Pump/Vertical Long-Shaft Pump

Vertical Turbine Pump/Vertical Long-Shaft/vertical discharge pump

Advantage features:

1. It is fine designed with hydraulic design software. It makes impeller and other wearing parts has a long life because of anti-abrasive impeller and Diffuser. The pump is not only reliable, safe, steady but also saving energy.
2. There is filter in pump inlet with proper hole, this can not only prevent impurity entering pump to damage pump but also decrease inlet loss and increase pump efficiency.
3. Impeller adopts balance hole to balance axial force There is replaceable seal ring in front and back cover board of impeller to protect impeller and pump.
4. Pump middle shaft, water column and guard pipe are multi-burl, middle shaft uses technology of sleeve coupling. Water pipe can be more or less for different inundated depth according to user's requirement. Impeller and Diffuser are multi-stage for different head.
5. Water pipe is connected by flange with guide bearing in its middle. Pump guide bearing adopts ethane or thereon bearing, it can also adopt rubber ( when the temperature of liquid is over 55° )
6. The remaining axial force of pump and the weight of rotor parts is borne by thrust bearing in motor seat or motor with thrust bearing. The thrust bearing is lubricated by dilute oil and cooled with exterior water. The thrust bearing can have element for monitoring temperature.
7. Pump shaft seal adopts packing seal, there is replaceable shaft sleeve in shaft seal and guide bearing to protect shaft, it is convenient to adjust axial location of impeller by nut in bearing parts upper end or pump coupling.

Production overview:
Type LC vertical long-shaft pump is a newly developed product with both homeland and over-seas advanced experience in design and manufacture. It is used to deliver clear water, sewage with certain solid particles (such as iron scrap, coal powder etc. ) and industry waste water and seawater with corrosive. The temperature of liquid can not be above 80° C. It is widely used in original water works, waste water factory, metallurgy and steel (especially suitable for delivering oxygenation iron sheet water), power station, mine, civil project and farmland etc.