Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Products > Manufacturing & Processing Machinery > Petroleum Equipment & Machinery > Other Petroleum Equipments & Machinery
Swipe or use the arrows to view product images.

Al2543 Double Pipes Bottom Loading Arm for Truck Tanker Loading

Price $2000.00
Min Order 1 Piece
Availability In Stock
Shipping From Jiangsu, China
Popularity 306 people viewed
Send Inquiry View Full Page
Model NO.:
Al2543 Double Pipes Bottom Loading Arm for Truck
After-sales Service:
Available
Warranty:
Available
Certification:
ISO 9001:2000, ISO 9001:2008
Power Source:
Hydraulic
Operation Pressure:
Vacuum
Applicable Medium:
Crude Oil
Structure:
Plug-In
Material:
Stainless Steel
Capacity:
3000 Sets/Year
Nominal Diameter:
DN50~DN150
Structural Composition:
Swivel Joint, Pipeline System, Supporting Structur
Trademark:
fast
Transport Package:
Plywood Case, Metal Frame, or Custom-Built
Specification:
2" to 6"
Origin:
China
HS Code:
8428909090
Product Description
Al2543 Double Pipes Bottom Loading Arm  for Truck Tanker Loading

The land loading and unloading arm is a piece of equipment used for the loading and unloading operations of media such as liquids and gases on land. The following is an introduction to this product:

Typical Models of Land Loading Arms:
ModelLoading PositionApplicationSingle/Double PipesLiquid Flange DirectionNo. of Swivel JointsConnection Type
AL1401Top LoadingSingleUpwards4Open
AL1402TopLoadingSingleDownwards4Open
AL1412TopLoadingDoubleDownwards4/5/8Open
AL1512TopLoadingDoubleDownwards10Closed
AL1513Top LoadingSingleUpwards4Open
AL2503BottomLoading/UnloadingSingle/5Closed
AL2543BottomLoading/UnloadingDouble/10Closed
AL2404BottomLoading/UnloadingSingleDownwards4Closed


 
Scope of Application
 
It is suitable for the bottom loading and unloading of vehicles and trains for highly volatile chemical media such as liquefied petroleum gas and liquid ammonia.
 
This equipment is suitable for loading and unloading a variety of media for road/rail tank cars with bottom interfaces.
 
This equipment is especially suitable for loading and unloading operations of various media in occasions with high environmental protection requirements.
 
Structural Features
 
The vehicle connection port of the outrigger can be equipped with a quick coupling or a loose flange according to the user's selection.
 
The gas-liquid phase pipeline system of this equipment is of rigid pipe structure. Through the connection of the swivel joint, the pipeline system can achieve operational flexibility within a large envelope range, thus simplifying the operation procedure and expanding the application scope of the equipment. Its features are as follows:
 
  • The pipeline is equipped with a swivel joint to achieve three-dimensional movement of the arm;
  • The spring cylinder balance system balances the bending moment generated by the outer arm and front-end components;
  • The vehicle connection port of the outrigger can be connected with a quick coupling or a loose flange as selected by the user;
  • The main sealing ring of the swivel joint is of the structure of reinforced PTFE + stainless steel spring steel clamp, which has good self-lubrication and wear resistance and can achieve self-compensation during wear.
  • A spring balance mechanism is adopted to balance the gravitational moment of the outer arm, and the unbalanced moment is less than 5Kg.M, making the operation light and labor-saving.
  • An anti-static device is equipped, which can effectively eliminate the stray charges generated by the liquid flow during the loading and unloading operations.
  • An inner arm locking mechanism is equipped to effectively reset the arm when it is not in use.
  • It is simple to install and maintain, and convenient for repair.
 
 
 
  • Similar Products
Full Page Contact Supplier
↑