Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Products > Industrial Equipment & Components > Valve > Steam Trap
Swipe or use the arrows to view product images.

Armstrong Design Inverted Bucket Steam Trap

Price $1.00
Min Order 1 Piece
Availability In Stock
Shipping From Zhejiang, China
Popularity 284 people viewed
Send Inquiry View Full Page
Model NO.:
GACS45H
Media:
Steam
Certification:
ISO, CE
Pressure:
Ordinary Pressure
Temperature:
Ordinary Temperature
Connection:
Flange
Material:
C.S
Size:
1/2"-2"
Category:
Steam Trap
Medium:
Steam
Working Temperature:
Below 425 Deg C
Usage:
Drain
Application:
Steam Equipments and Pipelines
Trademark:
GOOLE, OEM
Transport Package:
Carton, Plywood Case
Specification:
ISO 9001
Origin:
China(Mainland)
HS Code:
8481804090
Product Description

Armstrong Design Inverted Bucket Steam Trap

Product Description

Brief Introduction.

 Inverted bucket type steam trap,as a mechanical steam trap, has outstanding performance and can be used low ,medium and high pressure.
Working Principle

Working Principle

The design makes use of the working principle of difference in density of steam and condensate. The compound lever is connected to the inverted bucket inside the valve,working on steam pressure switch.The inverted bucket is a level sensor in the steam trap with opening downward.When the device starts up ,air and low-temperature condensate enter into the tube.At this time ,the trap is completely open,allowing quick discharge of air and low-temperature condensate and temperature rising. Steam entering into the inverted bucket causes it to float.and the lever arm drives the valve corce to close. A small vent in the bucket may automatically discharge the air.Some part of the steam will be discharged from the vent ,and other part of the steam will become condensate.The inverted bucket will sink without buoyant force, and then the lever arm will help the valve core to open the valve. When the valve is open, steam will get into the bucket again,causing the valve to close again. The device will work circularly and discharge water discontinuously.
Structure Principle

Structural Characteristic 

Inverted bucket type steam trap,as amechanical steam trap, has outstanding performance and can be used low ,medium and high pressure.It applies stainless steel internal components and heat treatable steel base . It has such features as strong structure,resistance to abrasion and corrosion, long durability, and not easy to be damaged. It is highly recommended to be used for condensate recovery sustem for its steam saving capability, High heat engine efficiency, and anti-back pressure characteristic. The trap may be assembled with check valve so as to save piping space.
Application

Field of Application. 

Product Name:88X Inverted Bucket Steam Trap.
Pressure Rating: 1.6- 4.0 Mpa.
Nominal Diameter: DN15-50 mm.
Body Material: cast steel.
Standard Flanges: DIN, ANSI, JIS, JB79.
Standard Screwed: NPT,BSP.
 
Product Details

Material of Main Component. 

Name of componentMaterial of component
Valve body, valve coverWCB
Internal componentsstainless steel
Valve body, valve coverWCB
Internal componentsstainless steel
 
Main External Dimensions.
 
 
 
ThreadModelDNACDBMaximum pressure kg/cm 2
8801/2 '' 3/4 ''961287014625
8811/2 '' 3/4 '' 1 ''9612810017641
8823/4 '' 1 ''14517013723125
8831 '' 1 1/4''18020219331325
8841 1/4' 1 1/2''20323221236225
8851 1/2'' 2 ''22025024839625
 
 FlangeModelDNACDBMaximum pressure kg/cm 2
881F15. 20 .259617010017625
882F20 .2514521013713141
883F25 .3218027019331425
884F32 .4020332021236225
885F40 .5022032024839625
886F65 .8026540031079925
View of the factory
 
  • Similar Products
Full Page Contact Supplier
↑