Automatic Electric Bike Motor Scooter PT Motor Coil Winding Machine

Electric Bike Motor Scooter PT Winding Machine


This Electric Bike Motor Scooter PT Winding Machine is consisted of machine body, indexing part, winding and wire array part winding and wire array part wire threading part, tensioner and control system. The winding, arraying and indexing are driven by servo motor controlled by control system 

Machine description

This Wheel hub motor coil winding machine equips with servo control system. It can diagnose fault, count output, etc. Other function such as auto winding, multi-diameter wires winding, auto indexing, auto skip slot and winding speed could be programmed in the touch screen. This machine is easy to operate and maintain.

Technical parameter:

Maintenance:

Every day check the mechanical, electrical, pneumatic and lubricating parts before work. Check if the fastener are loosen, abnormal noise in the moving parts or if the electrical parts can work normally.

After work, clean the machine and reset the machine.

Check if there is water in the air source filler regularly. If yes, drain away water.

Check if there is oil in the atomized lubricator regularly. If no, add oil.

Check the lubricating condition of guide way mechanism regularly.

Check the magnet valve screws and its pipe connector every 3 months

Clean the filler every 2 months

Calibrate the pressure gage every 1 year



 

With good service, unique philosophy, professional team and reliable quality, we win the worldwide customers' confidence gradually. We directly and indirectly supply our products to more than 50 countries .

Established in 2010, NIDE is a company devoted in the field of electric motors manufacturing, providing one-stop service for its customers.

NIDE has three main business divisions.
The first division is to provide different kinds of motor manufacturing machines, it is our Main business, including stand along machine, fully-auto complete line for armature and stator production, and the motor assembly line.
The second division is to supply the full range of motor components such as commutator, ball bearing, carbon brush, insulation paper, shaft, magnet, fan, motor cover, etc.
The third division is to provide technical support and consulting, project support and turn-key service for some motor manufacturing.