Swipe or use the arrows to view product images.
Automatic Electric Motor Cable Steel Wire Coil Winding Machine
| Price | $30000.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 477 people viewed |
Model NO.:
EN-tr2
Winding Width (Max.):
Less Than 1000mm
Max. Output Torque:
156n.M
Power of Motor:
5kw
Basic Output Shaft Speed:
440 R/Min
Center Height:
950mm
Stepping Accuracy:
0.01mm
Stepping Scope:
0.1~5mm
Wire Specifications:
Max Flat Wire 3 Multiply12mm Round Wire 0.1mm~5mm
Driven Type:
Electric
Condition:
New
Certification:
FDA, ISO, CE
Automatic Grade:
Automatic
Type:
High-Speed Stranding Machine
Trademark:
EN-SOURCE
Transport Package:
Wooden Package
Specification:
300-1300mm
Origin:
China, Zhejiang
HS Code:
85041900
Product Description
Automatic Electric Motor Cable Steel Wire Coil Winding Machine
I. Wire Winding Machine Introduction:
Automatic Electric Motor Cable Steel Wire Coil Winding Machine is a new and practical model improved by our factory.The complete machine has stable transmission, with neat wiring, low noise, convenient & flexible operation, frequency conversion control, stepless speed regulation and accurate counting. The wire guiding system adopts intelligent servo and the operation is controlled by the man-machine interface. This machine is an economical and practical product in similar products.
II.Coil Winding Machine Main Technical Parameters
III.Equipment other photo:
IV. Contact
I. Wire Winding Machine Introduction:
Automatic Electric Motor Cable Steel Wire Coil Winding Machine is a new and practical model improved by our factory.The complete machine has stable transmission, with neat wiring, low noise, convenient & flexible operation, frequency conversion control, stepless speed regulation and accurate counting. The wire guiding system adopts intelligent servo and the operation is controlled by the man-machine interface. This machine is an economical and practical product in similar products.
II.Coil Winding Machine Main Technical Parameters
| Item | Parameters |
| Center height | 950mm |
| Winding diameter (max.) | Ф600 mm |
| Winding width (max.) | ≤1000mm |
| Basic output shaft speed | 440 r/min |
| Stepping scope | 0.1~5mm |
| Stepping accuracy | 0.01mm |
| Counter maximum set number of turns | 9999.9 |
| Max. output torque | 156N.m |
| Maximum load | 500kg |
| Wire specifications | MAX Flat wire 3×12mm Round wire 0.1mm~5mm |
| Total weight | 1500kg |
| Power of motor | 5kw |
| Machine tool parts dimension (LxWxH) | 2250×1100×1630mm |
III.Equipment other photo:
IV. Contact
- Similar Products