Negotiable
1 Piece (MOQ)
fully auto YD-PL350C Tissue/Toilet Paper Making Machine
Baosuo Paper Machinery Manufacture Co., Ltd.
Swipe or use the arrows to view product images.
Automatic Flushable Wet Toilet Paper Wipe Making Producing Manufacturing Packing Sealing Machine
| Price | $200000.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Fujian, China |
| Popularity | 414 people viewed |
Model NO.:
GE-1700
After-sales Service:
Yes
Warranty:
1 Year
Certification:
CE, ISO 9001:2000
Condition:
New
Control:
Automatic
Embossing Type:
Edge-Embossing
Embossing Roller:
Steel Roller
Toilet Paper Type:
Without Core
Function:
Multi-Function
Trademark:
pkld
Transport Package:
Wooden Box
Specification:
Stable speed: 100 meters per minute
Origin:
China
Product Description
- Technical parameter
1,Reel-off stand(one set/unit)
| NO. | Item | Technical parameter |
| 1 | Maximum effective width of base fabric (mm) | 1650mm |
| 2 | Diameter of base fabric (mm) | 1500 |
| 3 | Unwinding speed (m/min) | <200 |
| 4 | Inner diameter of base fabric roll core | ∮76.2mm |
| 5 | Weight of base fabric (t) | Maximum 1 ton |
| 6 | Unwinding system | Belt width 240mm |
| 7 | Edge alignment and alignment of base fabric width | Controlled manually |
| 8 | Threading method | Manual cloth guiding |
| 9 | Cloth cutting detection | Equipped with a cloth cutting detection system. When the cloth is cut, the entire machine stops to reduce the waste of base fabric. |
| 10 | Power | 1KW |
| 11 | Minimum air pressure requirement | 0.4Mpa |
| 12 | Air consumption | Approximately 1 cubic meter per hour |
| Transmission | ||
| 13 | Power | Driven by an independent motor |
| 14 | Cloth feeding belt | Synchronous belt drive, flat belt drive |
| Others | ||
| 15 | Protection | The main transmission components are protected by protective covers |
| 16 | Size | L:3872*2626(W)*2225(H) |
| 17 | Weight (KG) | 350kg |
2,GE-8T-1700-Full-automatic dot-breaking folding machine (1 set / unit)
| Folding part | ||
| NO. | Item | Technical parameter |
| 1 | Maximum width of base fabric (mm) | 1700mm |
| 2 | Design speed (m/min) | 200m/min |
| 3 | Stable production speed | >100m/min |
| 4 | Folding method | Continuous operation, wind suction folding |
| 5 | Cloth cutting method | Fixed cloth cutting with spiral surface knife |
| 6 | Overall machine structure | Wall panel form |
| 7 | Finished product specification | 200±2mm |
| 8 | Roller knife | 3*2 |
| 9 | Specification after folding | 100(0,+3)mm |
| 10 | Cloth guiding method | Manual paper guiding |
| 11 | S-shaped cloth feeding device | Before cloth cutting, an S-shaped pulling roller is adopted, and the tension can be adjusted through the taper pulley; |
| 12 | Vacuum power | 30KW_fan |
| 13 | Power | 21kw |
| 14 | Minimum air pressure requirement | 0.4Mpa |
| Automatic folding and stacking section | ||
| 15 | Automatic folding and stacking system | It is independently controlled by using servo motors to realize the automatic folding and stacking function |
| 16 | Positioning tracking | Adopt high-precision servo encoders |
| 17 | Setting of the extracted quantity | The number of folding sheets can be set through the touch screen, and 100% accurate counting can be carried out (the set base number is an even number) |
| 18 | Setting range of the extraction number | 40-100 pulls/height:35-120mm |
| 19 | Maximum number of folding times | 16 folds |
| 20 | Minimum air pressure requirement | At least 0.4Mpa |
| 21 | Power | 4.75KW |
| Cloth-pressing and shaping system | ||
| 22 | Function | Make semi-finished products formed to be suitable for packaging. |
| 23 | Conveyor belt | Use anti-static belts. |
| 24 | Transmission mode | Independent frequency converter control. |
| 25 | Pressurization mode | Adopt air pressure to ensure the high stability of the products. |
| 26 | Photoelectric detection system | Photoelectric detection is installed on the conveyor frame to ensure no collision between each semi-finished product. |
| 27 | Power | 1.28 kw |
| 28 | Minimum air pressure requirement | At least 0.4 Mpa |
| Transmission | ||
| 29 | Power | Driven by an independent motor |
| Other | ||
| 30 | Protection | The main transmission components are protected by protective covers |
| 31 | Size | 2480(L)*3015(W)*2225(H) |
| 32 | Weight(KG) | 3700kg |
3,GE-L200-Single-channel large gyration
| NO. | Item | Technical parameter |
| 1 | Feed length | ≤2100mm |
| 2 | Maximum fabric cutting size (width × height × length) | 105×110×250 |
| 3 | Minimum fabric cutting size (width × height × length) | 60×50×85 |
| 4 | Design speed | 150/ |
| 5 | Production speed | 60-120/, |
| 6 | Tail-end dropping speed | 1 second (optional item), this function is not included in the standard configuration |
| 7 | Conveying mode | The positioning and conveying of the conveyor belt is driven by a servo motor system |
| 8 | Fabric cutting mode | Rotary swinging circular knife movement and continuous controlled non-woven fabric advancement |
| 9 | Diameter of the fabric cutting knife | ¢610mm |
| 10 | Knife sharpening method | The cylinder pushes the grinding wheel to contact the circular knife to achieve automatic knife grinding. The knife grinding parameters can be adjusted and controlled through the touch screen |
| 11 | Knife sharpening feed | Perform automatic knife grinding on the circular knife. The grinding wheel for knife grinding is automatically fed, and the parameters can be adjusted through the touch screen |
| 12 | Height compensation of the cutter holder | Use the handwheel for adjustment to achieve height compensation. |
| 13 | Length adjustment of non-woven fabric | Controlled by the panel, the control accuracy is ±2mm |
| 14 | Verticality tolerance of the cut surface | ±2mm |
| 15 | Support and pressure device for non-woven fabric | Install a pressure belt on the upper part of the non-woven fabric to reduce the length error of the non-woven fabric. |
| 16 | Appearance of the finished product | There is no paper surface dirt or damage caused by the machine, and the cut surface of the non-woven fabric is neat after cutting. |
| 17 | Power | Total power 6.9KW |
| 18 | Minimum air pressure requirement | 0.4Mpa |
| 19 | Dynamic load coefficient | 1.1 |
| Transmission | ||
| 20 | Power | Independent motor drive |
| 21 | Non-woven fabric input | Servo control, synchronous belt drive |
| 22 | Rotation of the cutting knife | Synchronous belt drive |
| 23 | Rotation of the knife arm | Synchronous belt drive |
| 24 | Non-woven fabric output | Motor drive, synchronous belt drive |
| Other | ||
| 25 | Protection | The main transmission components are protected by protective covers |
| 26 | Size | 1700(L)*1510(W)*2020(H) |
| 27 | Weight(KG) | Safety door lock protection, overload protection |
4,GE-JY316-Three-dimensional humidification system
| NO. | Item | Unit | Qty |
| 1 | Liquid adding and liquid storage mixing tank (1000L + 1000L) | IN | 1 |
| 2 | Liquid adding pump (quantitative humidification) | IN | 1 |
| 3 | Inverted filling centrifugal pump | IN | 1 |
| 4 | Residual liquid recovery pump | IN | 1 |
| 5 | Stainless steel in contact with materials after liquid immersion (316 material) | IN | 1 |
| 6 | Water tanks, return water troughs, pipelines, water sprays, and valves are all made of 304 stainless steel | IN | 1 |
| 7 | Hygienic centrifugal pump for liquid addition, top-in and bottom-out | IN | 1 |
| 8 | Jiangnan hygienic centrifugal pump, inverted filling and return liquid, low-point discharge | IN | 1 |
| 9 | Liquid addition pipe (316) stainless steel | IN | 12 |
| 10 | Humidification quantity error | IN | 5% |
5,UT-WP100-Automatic packaging machine (high speed)
| UT-WP100 Main parameters | |||
| production process | Synchronous conveying → Automatic packaging → Automatic hole opening → Automatic labeling → Heat sealing and cutting → Automatic corner folding → Product air compression → Finished product output | ||
| 1 | Production speed: max 90 packs/minute | ||
| 2 | Packaging size: Length 150 - 350mm, Width 90mm - 115mm, Height 20 - 95mm | ||
| 3 | Label size: Length 50 - 150mm, Width 30 - 80mm | ||
| 4 | Hole opening size: Length 10 - 70mm, Width 5 - 50mm | ||
| 5 | Applicable packaging materials: PET/PE, BOPP, PET/AL/PE and other heat-sealable materials | ||
| 6 | Film specification: max Φ400mm, W450mm | ||
| 7 | Film shaft diameter: 3" | ||
| 8 | Number of film shafts: 2 shafts | ||
| 9 | Applicable labels: Transparent labels, printed labels (aluminum-coated labels need to be specially indicated) | ||
| 10 | Label roll diameter: max Φ350mm | ||
| 11 | Number of label rolls: 2 rolls | ||
| 12 | Labeling methods: Vertical labeling, safety labeling | ||
| 13 | Changeover time ≤ 60 minutes | ||
| 14 | Automatic shutdown and alarm for equipment failure | ||
| 15 | Material of components in contact with water: SUS304 (except for belts) | ||
| 16 | Pneumatic components: AirTAC | ||
| 17 | Key bearings: NSK/TNT | ||
| 18 | Flat belts: PU | ||
| 19 | Synchronous belts: Fulong | ||
| 20 | Power requirements: 3-phase 5-wire, AC 380V ± 5%, 50HZ ± 2%, 8KW | ||
| 21 | Air source requirements: 0.6 - 0.8 Mpa, 100 L/min | ||
| 22 | Whole machine weight: Approximately 2.5 tons | ||
| 23 | Bearing capacity requirement: 0.5 tons/square meter | ||
| operation interface | |||
| 1 | LCD human-machine interface: 8 inches, displaying the real-time speed of the machine. It contains Chinese/English operation platforms. | ||
| 2 | Production data recording and storage function; providing MES data interface | ||
| 3 | Software, troubleshooting interface | ||
| 4 | Product SKU information storage function | ||
| 5 | The human-machine interface can operate and control the machine speed | ||
| 6 | Remote assistance and monitoring function |
6,UT-LM80 Parallel robot capping machine
| UT-LM80 Capping Machine Parameters | |||
| production process | Put the cap → Automatic labeling → Mechanical hand grabs the cap → Automatic glue spraying → Visual recognition → Positioning and gluing the cap → Finished product output | ||
| Main parameters | |||
| 1 | Production speed: max 80 pieces/minute | ||
| 2 | Capping accuracy: longitudinal ±1mm, lateral ±1.5mm | ||
| 3 | Labeling accuracy: longitudinal ±1mm, lateral ±1mm | ||
| 4 | Packaging size: length 150 - 280mm, width 85mm - 110mm, height 20 - 100mm | ||
| 5 | Manual bag size: length 100 - 350mm, width: 60 - 135mm | ||
| 5 | Cap size: length 50 - 180mm, width 50mm - 120mm, height 2 - 10mm | ||
| 6 | Label size: length 40 - 100mm, width 50 - 80mm | ||
| 7 | Applicable labels: transparent labels, printed labels. If it's aluminized composite labels, it should be indicated. | ||
| 8 | Label roll diameter: max Φ350mm | ||
| 9 | Number of label rolls: 2 rolls | ||
| 10 | Labeling method: longitudinal labeling | ||
| 11 | Model change time ≤ 60 minutes | ||
| 12 | Automatic shutdown and alarm for equipment failure | ||
| Main configuration | |||
| 1 | Parallel robot servo: Inovance | IN | 1 |
| 2 | Controller: KABA | IN | 1 |
| 3 | Encoder: Omron | IN | 1 |
| 4 | Vision system: Mindvision | IN | 1 |
| 5 | High-speed lens: Japan Computer | IN | 1 |
| 6 | Glue sprayer: Huangshang | IN | 1 |
| 7 | Thermal insulation hose: Huangshang | IN | 1 |
| 8 | Glue gun: Huangshang | IN | 1 |
| 9 | High-frequency solenoid valve: MAC (USA) | IN | 1 |
| 10 | Cap detection photocell: Omron | IN | 1 |
| 11 | Label detection photocell: Optical fiber | IN | 1 |
| 12 | Circuit breaker: Schneide | ||
| 14 | Key bearing: OPTIBELT (Germany) | ||
| 15 | Flat belt: PU | ||
| 16 | Synchronous belt: Fulong | ||
| 17 | Pneumatic components: AirTAC | ||
| 18 | Protective door: Stainless steel doors on both sides with plexiglass windows | ||
| operation interface | |||
| 1 | LCD human-machine interface: 10 inches, displaying the real-time speed of the machine, with Chinese/English operation platforms. | ||
| 2 | Production data recording and storage function; providing MES data interface. | ||
| 3 | Software, troubleshooting interface. | ||
| 4 | Product SKU information storage function. | ||
| 5 | The human-machine interface can operate and control the machine speed. | ||
| 6 | Remote assistance and monitoring function | ||
| Lower cover | |||
| 1 | Lower cover dispenser | IN | 2 |
| 2 | Cap detection device | IN | 2 |
| Labeling | |||
| 1 | Cap label labeling system | IN | 1 |
| 2 | Label detection device | IN | 1 |
| Glue spraying | |||
| 1 | Glue sprayer | IN | 1 |
| 2 | Glue hose | IN | 1 |
| 3 | Nozzle | IN | 1 |
| Grabbing the cover | |||
| 1 | Parallel robot | IN | 1 |
| 2 | Cap suction system | IN | 1 |
| Vision | |||
| 1 | Visual recognition | IN | 1 |
| 2 | Light compensation device | IN | 1 |
| Conveyor system | |||
| 1 | Cap conveying mechanism | IN | 1 |
| 2 | Wet wipe convey mechanism | IN | 1 |
- Similar Products
$150000.00
1 set (MOQ)
Automatic Hand Towel Roll Tissue Paper Machine
DONGGUAN ACE MACHINERY CO., LIMITED
Negotiable
1 Piece (MOQ)
YCF-B-2L Emboss Napkin Paper Machine(1-2 color printing)
Baosuo Paper Machinery Manufacture Co., Ltd.