Swipe or use the arrows to view product images.
Bb4 (FMC) Multistage Centrifugal Chemical Pump with High Pressure High Temperature for Oil and Gas
| Price | $50000.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Jiangsu, China |
| Popularity | 307 people viewed |
Model NO.:
Bb4 (FMC)
Max.Head:
>150m
Max.Capacity:
>400 L/min
Driving Type:
Motor
Impeller Number:
Multistage Pump
Working Pressure:
High Pressure Pump
Influent Type of Impeller:
Single Suction Pump
Position of Pump Shaft:
Horizontal Pump
Pump Casing Combined:
Horizontal Split Pumps
Mounting Height:
Since Irrigation Centrifugal Pumps
Impeller:
Closed
Usage:
Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
Capacity:
~1200m3/H
Head:
~2800m
Pressure:
11MPa
Temperature:
-20~125degree
Standard:
GB/T5656
Rotation Speed:
2950
Package:
Plywood Box
Trademark:
Feiyue
Transport Package:
Plywood Box
Origin:
Jiangsu, China
Product Description
Bb4 (FMC) Multistage Centrifugal Chemical Pump with High Pressure High Temperature for Oil and Gas
Conform to design standard of GB/15656
Flow range: ~1200m3/h
Lift range: ~2800m
Design pressure: 11MPa
Application temperature: -20~125ºC
Application field: This series of pump is mainly used in industries of oil refinery, petrochemical engineering, coal chemical industry, power plant, environmental protection engineering, wastewater treatment, cement plant etc.
Suitable for transporting all kinds of neutral or corrosive medium such as clean, particle free chemical medium, oil, wastewater.
Flow range: ~1200m3/h
Lift range: ~2800m
Design pressure: 11MPa
Application temperature: -20~125ºC
Application field: This series of pump is mainly used in industries of oil refinery, petrochemical engineering, coal chemical industry, power plant, environmental protection engineering, wastewater treatment, cement plant etc.
Suitable for transporting all kinds of neutral or corrosive medium such as clean, particle free chemical medium, oil, wastewater.
Our API 610 type BB4 pumps are multistage, centre line mounted, radial split, single or double suction, between bearing pumps. The pump and motor are flexibly coupled and installed on a common baseplate. The pump design is available in two executions, inline with balance piston or in back to back (opposed) impeller design. Due to the ring section casing design, the piping must be dismantled for removal of the rotor assembly.
1.Meet partly API 610 requirements
2.Top-top nozzle design
3.Double volute design
4.Single entry or Double entry impeller for low NPSHR characteristics
5.Rotor axially balanced with balance piston or back to back design of impellers
6.Seal area meet API 682
7.Mechanical seals and seal systems as per API682
8.Hydrodynamic or antifriction bearings
9.Other design options available
10.All metallurgies available
11.Design to customer specifications available
| 1 | Axle | 2 | Bearing body parts(a) | 3 | Adjust the shalt sleeve | 4 | Seal sleeves | 5 | Suction segment | 6 | Seal flush piping |
| 7 | In the middle | 8 | Primary guide vane | 9 | Leveateodtegibe | 10 | Spit out section | 11 | Balance disc component | 12 | Pump cover |
| 13 | Pading imngmechanica seal | 14 | Packing gland/seal | 15 | Bearing body parts (b) | 16 | Jilt hydrosphere |
Performance parameters of the table
- Similar Products
$1000.00
1 Piece (MOQ)
304 or 316 Impeller Sanitary Stainless Steel Centrifugal Pump
QILI HOLDING GROUP CO., LTD.
$3000.00
1 Piece (MOQ)
Mining and Mineral Centrifugal Slurry Pump
Shanghai Sunpace Machinery Co., Ltd.