Swipe or use the arrows to view product images.
Bedford Automatic Pressure Control Mini Water Booster Pump for Farm Garden Irrigation
| Price | Negotiable |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Guangdong, China |
| Popularity | 471 people viewed |
Model NO.:
B1100-MLH
Max.Head:
54m
Max.Capacity:
12m3/H
Driving Type:
Motor
Impeller Number:
Multistage Pump
Working Pressure:
Low Pressure Pump
Influent Type of Impeller:
Single Suction Pump
Position of Pump Shaft:
Horizontal Pump
Pump Casing Combined:
Horizontal Centrifugal Pump
Mounting Height:
Since Irrigation Centrifugal Pumps
Impeller:
Semi-Open
Usage:
Pump, Water Supply, Irrigation
Frequency:
50Hz/60Hz
Input Voltage:
Single Phase 220V
Warranty:
12 Months
Color:
Blue
Trademark:
BEDFORD
Transport Package:
Packed in Plywood Cases or Carton
Specification:
Depend on Models
Origin:
Guangzhou, China
Product Description
Bedford Automatic Pressure Control Mini Water Booster Pump for Farm Garden Irrigation
Product Description:
B1100 Series with superior performance and rich function, can meet the requirement of water supply in different occasions and improve the quality of water supply system to achieve the effect of energy saving and environmental protection.
Main Features:
Delivery Head: Max.54m
Flow:Max.12m³/h
Start/stop the pump automatically
Variable frequency drive to lower pump power consumption
Integrated matching design
Medium Temperature:+15-70%
Application:
Applicable to Villa, School, Hotel, Sauna Room, Garden Irrigation, etc.
Product Details:
Installation/Test-Operation of the Product
1 Environmental Conditions
This product is designed for indoor use. If you want to install the product on outdoor areas, prepare facilities that can provide the product with protection against rain, wind and low temperature.
2 Installation Requirements
As shown in Figure 1, Figure 2, after installing and cleaning the pools, make sure to extract air. If the inside of the pump is filled with air, the pump may overheat by friction during operation to damage the internal parts.
The diameter of inlet pipe must be the same or large than the diameter of the pump inlet.
The inlet water level shall be higher than 2m from the center of the pump, as shown in Figure 1 and Figure 2. The inlet water level as shown in Figure 3 and Figure 4 is wrong.
Product Description:
B1100 Series with superior performance and rich function, can meet the requirement of water supply in different occasions and improve the quality of water supply system to achieve the effect of energy saving and environmental protection.
Model | Input Voltage | Output Power (kW) | Current (A) | Head (m) | Flow (m3/h) | Threaded Bore (Inlet/Outlet) |
B1100-MLH20311-S20007 | 50/60Hz | 0.55 | 2.0 | 37 | 2 | G1/G1 |
B1100-MLH3041-S2001 | 0.75 | 3.2 | 42 | 3 | G1/G1 | |
B1100-MLH8201-S20025 | 1.85 | 7.9 | 36 | 8 | G1.5/G1.5 |
Main Features:
Delivery Head: Max.54m
Flow:Max.12m³/h
Start/stop the pump automatically
Variable frequency drive to lower pump power consumption
Integrated matching design
Medium Temperature:+15-70%
Application:
Applicable to Villa, School, Hotel, Sauna Room, Garden Irrigation, etc.
Product Details:
Installation/Test-Operation of the Product
1 Environmental Conditions
This product is designed for indoor use. If you want to install the product on outdoor areas, prepare facilities that can provide the product with protection against rain, wind and low temperature.
2 Installation Requirements
As shown in Figure 1, Figure 2, after installing and cleaning the pools, make sure to extract air. If the inside of the pump is filled with air, the pump may overheat by friction during operation to damage the internal parts.
The diameter of inlet pipe must be the same or large than the diameter of the pump inlet.
The inlet water level shall be higher than 2m from the center of the pump, as shown in Figure 1 and Figure 2. The inlet water level as shown in Figure 3 and Figure 4 is wrong.
- Similar Products