Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

Brand New Mini Gr135 130HP Road Construction Machine Hydraulic Motor Grader with Front Blade and Rear Ripper

Price $44000.00
Min Order 1 Piece
Availability In Stock
Shipping From Henan, China
Popularity 462 people viewed
Model NO.:
GR135
After-sales Service:
Online
Warranty:
1year
Certification:
ISO, CE
Condition:
New
Application:
Railway, Mine, Farmland, Highway
Transmission:
Hydraulic
Walking Mode:
Wheeled
Type:
Small Grader
Operating Weight:
11100kg
Working Pressure:
16MPa
Engine Model:
6bt5.9
Rated Power:
100/2200kw/Rpm
Tractive Force:
61.3kN
Blade Width:
3710mm
Working Hydraulic Pressure:
16MPa
Trademark:
KOMATCO
Transport Package:
Container
Specification:
8900*2625*3470mm
Origin:
Jiangsu
HS Code:
8429209000
Product Description
Product Description

Brand New Mini GR135 130HP Road Construction Machine Hydraulic Motor Grader with Front Blade and Rear Ripper

The GR135 motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farm- lands etc. It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.

Advantages and Highlights:

1. GR135 adopt Dongfeng 6BT5.9-C130- II turbocharged diesel engine, Large output torque and power reserve coeficient and low oil consumption.

2. Torque converter has big torque coefficient, wide high efficiency area. It has good combination working characteristics with engine. The transmis- sion box has six forward gears, three backward gears, with neutral start
protection function, gear shift controlled by electro-hydraulic, flexible operation, shift without impact, reasonable speed ratio distribution, meet the requirements of various working conditions.

3. The rear axle adopts balanced suspension to ensure the uniform load of four wheels, which is conducive to the full use of its adhesion ability. The main drive of the rear axle is equipped with"NO - SPIN" self-locking differential.

4. The front axle is steering axle. The axle can swing from side to side. In addition to the front steering, it also uses the articulated frame, which can further reduce the turning radius.

5. The hood is structural part, well shaped with turn over function, the two sides double door is reversible, enhances the maintainability.

Product Parameters
Description UnitParameter value
Engine model   6BT5.9-C130-2
Rated power/speed kw(r/min)97(2200)
Overall dimension (standard)  8015X2380X3050
Total weight (standard) kg11000
Tire specification  13.00-24
Ground clearance (front axle) mm515
Tread mm2020
Space of front and rear axles mm5780
Forward velocity km/h5/8/13/20/30/42
Reverse speed km/h5/13/30
Tractive effort f=0.75 kN61.3
Maximum gradeability %20
Tire inflation pressure kPa300
Working system pressure MPa16
Transmission pressure MPa1.3-1.8
Maximum steering angle of front wheel  ±49°
Maximum slant angle of front wheel  ±17°
Maximum oscillating angle of front axle  ±15°
Maximum oscillating angle of equilibrium box  ±16°
Maximum steering angle of frame  ±27°
Minimum turning radius m6.6
Scrape knifeMaximum lift heightmm410
Maximum cutting depthmm515
Maximum tilt angle 90°
Cutting angle 54°-90°
Angle of revolution 360°
Length & chord heightmm3048x610
Detailed Photos

Company Profile

 

  • Similar Products
Full Page Contact Supplier