Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

C308 Copper Zinc Aluminum Catalyst Methanol Synthesis Catalyst From CO2 Hydrogenation

Price $30.00
Min Order 1 Ton
Availability In Stock
Shipping From Henan, China
Popularity 457 people viewed
Model NO.:
C308
Usage:
Positive Catalyst
Effect Size:
Promoter Catalysts
Manufacturing Method:
Mechanical Mixing
Application Industry:
Industry
Item:
Methanol Synthesis Catalyst
Color:
Black Pellet
Bulk Density:
1.3-1.5kg/L
Size:
Φ5*4-6mm
Surface Area:
80-100m2/G
Trademark:
ZHULIN
Transport Package:
Drum
Specification:
copper zinc aluminum
Origin:
China
Product Description
C308 Methanol Synthesis Catalyst

Product Features
1. advanced technical performance
2. low operating pressure
3. good thermal stability and selectivity
4. high methanol space-time yield


Physical and chemical properties
Appearance: Φ5x4~6mm black cylinder
(Tablets of other sizes can also be produced according to user needs)

Bulk density: 1.3~1.5kg/l
Specific surface: 80-100m2/g

Chemical composition: oxides of copper, zinc, aluminum and other additives


Application
This product is mainly used in low-pressure methanol synthesis reactors, and can also be used in medium and high-pressure methanol synthesis or co-alcohol production.


Index
ItemIndicator
Methanol space-time yield before heat resistance (g/ml.h )≥1.3
Methanol space-time yield after heat resistance (g/ml.h )≥ 1.0
Low strength percentage (less than 90N/cm)  (%)≤ 7.5
Particle radial crushing strength (N/cm)180
Wear rate (%)≤3.0

Product usage and maintenance
·Normal use
Operating temperature: 210~300°C
Operating pressure: 3.0~10.0MPa
Applicable airspeed: 7000~20000h-1


·Maintenance
a. Frequent start-up and shutdown will damage the life of the catalyst, no matter how careful the operation is, it

will always damage the performance of the catalyst, so try to avoid unnecessary shutdown.
b. Reduce sulfur, chlorine, oil and other impurities in the raw gas as much as possible, and keep the total sulfur
below 0.1ppm.
c. The raw material gas should contain an appropriate amount of CO2, which can promote the increase of metha
nol yield, reduce the formation of by-products, ease the heat generation of the catalyst, and prevent carbon
formation, etc.
d. The catalyst should avoid rolling and violent collision during transportation, and the airtightness of the packag
ing barrel should be good. The storage condition is required to be dry, so as not to absorb moisture and sulfifide in
the air. Once the package is found to be damaged, it should be replaced in time.

 

Any requirements about activated carbon, pls do not hesitate to contact us.


  • Similar Products
Full Page Contact Supplier