China Boiler Camera Furnace Monitoring Manufacture

China boiler camera furnace monitoring manufacture 

Product introduction


The vault temperature of hot blast stoves is mostly measured by thermocouples. Due to the use of thermocouples (high temperature, high pressure) and structural limitations, under the influence of many factors such as large temperature fluctuations, vibration and installation methods, it is easy to cause short life of thermocouples, Maintenance costs are high. The infrared temperature measurement method can make up for many shortcomings of thermocouples, and is more suitable for non-contact, long-distance, high-temperature and harsh-site temperature measurement.

The LM-RFL6016 hot-blast stove vault temperature measurement system uses the most advanced non-contact infrared thermometer as the core measurement element, which can be aimed at the object to be measured for long-distance measurement. As long as there is no barrier between the object and the object to be measured, accurate measurement can be achieved, and the object can be continuously measured in a relatively good environment. The system is basically maintenance-free and does not require circulating water cooling. The operating cost is extremely low, and it can provide users with the best online continuous automatic temperature measurement.


Product feature

1. Wide temperature measurement range and fast response speed.
2. Continuous automatic temperature measurement, extremely low operating cost
3. High measurement accuracy under harsh conditions.
4. Suitable for a variety of scenes
5. Maintenance-free
6. No need to circulate cooling, no need to purify and purge
7. Built-in client interface and panel for easy setting

Product Datasheet