Swipe or use the arrows to view product images.
China Xyzlift Brand Residential Traction Lift Elevator Complete Lift in Stock
| Price | $10000.00 |
|---|---|
| Min Order | 1 Set |
| Availability | In Stock |
| Shipping From | Shandong, China |
| Popularity | 442 people viewed |
Model NO.:
VPL-3
After-sales Service:
Door to Door Service
Warranty:
12 Monthes
Driving Type:
Traction
Capacity:
<500kg
Persons:
<5
Speed:
2.00 - 3.50m/s
Control Mode:
Push-Button Control
Position of Computer Room:
Without Computer Room
Elevator Door:
Sider Door
Door Knife:
Single
Deceleration Device:
With Deceleration Device
Attendant:
Without Attendant
Pit:
Wit or Without Pit, Two Option
Size:
According to Customer Installation Site Size
Shaft:
Without Shaft, in Concrete Shaft, or with L
Color:
Optional, Better Match Your House Design
Landing Door:
Swing Door, Auto Central Open, Auto Side Open
Car Design:
Stainless Steel, Wooden Panel, Glass
Home Lift Safety 1:
E-Stop One Cop, Overload Warning,UPS
Hydraulic Home Lift Safety 2:
E-Stop on Car Top and Pit, Safety Gear
Hydraulic Home Lift 2:
Speed Max Limited,Maintain Support
Overhead Room:
2300mm, If No Car, 1900mm Enough.
Home Lift Installation Service:
Xyzlift Team Supply Overseas Installation Work
Stop:
2 Stop
Travel Height:
3m
Trademark:
XYZLIFT
Transport Package:
by Sea
Specification:
4 wooden box package
Origin:
China
HS Code:
842890
Product Description
China XYZLIFT Brand Residential Traction Lift Elevator Complete Lift in Stock
Traction lifts are a simple system. A motor is attached to a sheave (a toothed pulley), with a rope or cable looped over it. The rope is attached at one end to the lift car, and on the other end to a counterweight.
When the lift is called to a floor, the motor turns the sheave. This motor can move in both directions - one moving the lift car up, the other moving it down.
As the lift car rises, the counterweight lowers - and vice versa. The counterweight means there is less strain on the motor and the whole system, meaning that less power is required to move the lift car up or down. This is similar to a see-saw - if there is only one person on the see-saw it takes far more energy to get to the top, whereas the balance between two people make it easier.
Advantages:
1. Energy Efficiency: Traction lifts consume less power, especially in taller buildings, due to the counterweight system.
2. Smooth Ride: Traction elevators provide a smoother ride with gradual acceleration and deceleration.
3. Higher Speed: Capable of faster movement compared to hydraulic lifts, making them ideal for tall buildings.
4. Greater Capacity and Height: Can handle more weight and travel longer distances, serving multiple stories easily.
Disadvantages:
1. Higher Cost: Installation and maintenance of traction lifts can be expensive due to their complex machinery.
2. Space Requirements: They typically need a machine room for the motor and pulley system, which can be a limitation in space-constrained homes.
When the lift is called to a floor, the motor turns the sheave. This motor can move in both directions - one moving the lift car up, the other moving it down.
As the lift car rises, the counterweight lowers - and vice versa. The counterweight means there is less strain on the motor and the whole system, meaning that less power is required to move the lift car up or down. This is similar to a see-saw - if there is only one person on the see-saw it takes far more energy to get to the top, whereas the balance between two people make it easier.
Advantages:
1. Energy Efficiency: Traction lifts consume less power, especially in taller buildings, due to the counterweight system.
2. Smooth Ride: Traction elevators provide a smoother ride with gradual acceleration and deceleration.
3. Higher Speed: Capable of faster movement compared to hydraulic lifts, making them ideal for tall buildings.
4. Greater Capacity and Height: Can handle more weight and travel longer distances, serving multiple stories easily.
Disadvantages:
1. Higher Cost: Installation and maintenance of traction lifts can be expensive due to their complex machinery.
2. Space Requirements: They typically need a machine room for the motor and pulley system, which can be a limitation in space-constrained homes.
| Model | VPL-3 |
| Load capacity | 400kg |
| Car size | Max 1200x1300mm |
| Stop | 2-6 stops |
| Travel height | Up to 6 floors level(Net rise within 16m, total height within 20m) |
| Top level height | Not less than 2850mm |
| Rated speed | Max 0.4m/s |
| Power supply | 220V 2phase or 380V 3-phase, 50/60hz |
| Car Wall | Materials in Stainless steel 304 or tempered glass or wood |
| Car Door | Electric Double-opening Door |
| Landing door | Electric Double-opening Door, Electric Single-opening Door |
| Pit | More than150mm deep |
1. Outdoor traction home lift: Outdoor traction home lift use heavy structure shaft. Shaft glass is 5+0.75+5mm double layer glass.
2. Traction Home lift in concrete shaft: XYZLlFT supply home lift and landing door.
3. Traction Home lift with glass shaft: Traction Home lift with glass shaft, Home lift size is designed according to installation area
4. Traction Home lift only: Thins kind home lift is suitable for limited traction home lift installation area.
| No. | Main Safety Devices | No. | Main Safety Devices |
| 1 | In-car Emergency Lighting | 9 | Safety Circuit Protection |
| 2 | Full Load Bypass | 10 | Limit Protection |
| 3 | Overload No-Start | 11 | Upper and Lower Limit Protection Device |
| 4 | Automatic Fault Detection Function | 12 | Operating Contactor Protection |
| 5 | One-touch Call | 13 | Brake Detection Protection |
| 6 | Pit Buffer Device | 14 | Electric Brake Release Rescue |
| 7 | Light Curtain Door Protection Device | 15 | Power Outage Emergency Leveling |
| 8 | No Door Opening Outside Door Zone | 16 | One-touch Dialing Function |
XYZLIFT Traction lift suitable different installation site, customized according to your actual situation.
Our landing doors can be customized with the following 4 opening methods according to your needs:
Shaft color,control panel Optional
Car design,ceiling, floor Optional
XYZLIFT Traction Home Elevator Car Design
1.Traction Home elevator cabin walls are available in either stainless steel, glass or wood.
2.Stainless steel color options include original, black, rose gold, gold, and white.
3.Glass colors can be chosen from clear, black, blue, and frosted glass.
4.Stainless steel thickness options are 0.5mm, 0.8mm, and 1.2mm.
5.Combination of engineered wood panels with aerospace-grade aluminum, featuring mirrored stainless steel on both sides and high-quality LED light strips.
6.Glass thickness choices include 5mm, 8mm, or 5+5mm double-layered glass.
1.Traction Home elevator cabin walls are available in either stainless steel, glass or wood.
2.Stainless steel color options include original, black, rose gold, gold, and white.
3.Glass colors can be chosen from clear, black, blue, and frosted glass.
4.Stainless steel thickness options are 0.5mm, 0.8mm, and 1.2mm.
5.Combination of engineered wood panels with aerospace-grade aluminum, featuring mirrored stainless steel on both sides and high-quality LED light strips.
6.Glass thickness choices include 5mm, 8mm, or 5+5mm double-layered glass.
Traction Home Elevator Ceiling & Floor
1.The elevator cabin ceiling style is customized based on client preferences.
2.The cabin's standard flooring is PVC, but there's an option for clients to choose wooden flooring or ceramic tiles.
3.Thousands of styles available for ceilings & floors for choose.
All parts of the home lift are packaged in seaworthy standard plywood boxes, lined with moisture-proof and waterproof plastic bags.
Each part is labeled with an identification tag, and each packaging box includes a packing list.
Generally, one 2-floor home lift is packaged in 4 plywood packages.
The motor and all parts are in Package 1: 2770x1340x1570mm;
The guardrail frame is in Package 2: 2330x1210x840mm;
The guide rail and cylinder are in Package 3: 3230x370x280mm;
The shaft frame is in Package 4: 3000x750x750mm. Total: 1450kg, 4 packages.
Each part is labeled with an identification tag, and each packaging box includes a packing list.
Generally, one 2-floor home lift is packaged in 4 plywood packages.
The motor and all parts are in Package 1: 2770x1340x1570mm;
The guardrail frame is in Package 2: 2330x1210x840mm;
The guide rail and cylinder are in Package 3: 3230x370x280mm;
The shaft frame is in Package 4: 3000x750x750mm. Total: 1450kg, 4 packages.
- Similar Products
$15000.00
1 Piece (MOQ)
5000kg 1m/S Factory Cargo transportation Elevator
MTK ELEVATOR (HANGZHOU) CO., LTD.
$2800.00
1 Piece (MOQ)
Affordable Mini Small Home Elevators for Seniors Cost
Jinan Lifcore Industry Co., Ltd.
Negotiable
2 Rolls (MOQ)
Marine Grade 1X19 Steel Wire Rope for High Speed Elevators
Gustav Wolf Wire Rope (Suzhou) Co., Ltd.
$12000.00
1 Piece (MOQ)
Small Pit Small Overhead Steel Belt Dive Home Lift
MTK ELEVATOR (HANGZHOU) CO., LTD.
$5000.00
1 unit (MOQ)
Customized Hydraulic Wheelchair Lift Pdw Elevator for Sale
Jinan Morn Technology Co., Ltd.