Swipe or use the arrows to view product images.
City Underground Sewer Pipe Liner Film Pipeline Rehabilitation UV Cipp Liner Hose
| Price | $20.00 |
|---|---|
| Min Order | 300 Meters |
| Availability | In Stock |
| Shipping From | Jiangxi, China |
| Popularity | 302 people viewed |
Model NO.:
CIPP1001
After-sales Service:
10 Years
Warranty:
5 Years
Material:
Fiberglass Fabric
Kind:
UV Cured Resin Hose
Water Absorption:
＜0.01%
Contraction Percentage:
0.4%~1.4%
Tensile Strength:
81~130MPa
Hose Wall Thickness:
3-18mm
Elastic Modulus:
16000MPa
Bending Strength:
500MPa
Ttensile Strength:
160MPa
Resin Curing Wavelength Peak:
365~420nm
Trademark:
JUBO
Transport Package:
Wooden Case
Specification:
DN200-DN2000
Origin:
China
Product Description
UV Curing Cipp Lining Film indrustral sewage pipeline curing repair materials
Products Introduction:
The self-developed UV-CRUable liner pipe is a dry hose made of glass fiber cloth and impregnated with UV-curable resin, which is mainly used for trenchless UV-curable pipeline repair and structural reinforcement of underground pipelines. When used, it needs to be pulled into the original pipeline, inflatable expansion close to the original pipeline, and then solidified under ultraviolet light to form a lining pipe with high strength.
At present, the workshop has high production efficiency, and a single shift can produce 250 meters, especially suitable for large-scale official website emergency project procurement. At present, the largest diameter DN1800 Lined hose, has realized the process breakthrough in the industry, non-standard diameter production experience, technology stability at the same time, quality assurance, short production cycle, domestic cities can reach the construction site in 7 days.
Products Feature:
The repaired pipeline structure meets or exceeds the strength, stability and deformation requirements
The repaired pipeline is smooth and meets the flow capacity requirements
The service life of the repaired pipeline is more than 50 years
Good ductility and fits the pipe wall
Good material stability, interruption of curing in the middle and restarting will not affect the curing effect
High cost performance compared to imported materials
Higher curing speed than imported materials, up to 2m/min
Product Parameter:
Remarks: Can accept customized.
Construction Site:
Certifications:
Our Factory:
Ultraviolet Light Curing Hose Used in In-situ Pipeline Repairing
Used for drainage pipe repair of sewage, rainwater, etc. Used for pipe repair including different sections of round, rectangular, egg and so on. Meet the customized design and construction for non-standard and variable diameter pipelines in the project. The whole series are made of high-quality anti-corrosive glass fiber.
General Hose Parameters | |
Pipe diameter of hose | DN200-DN2000 |
Hose wall thickness | 3-18mm |
Elastic modulus | 16000MPa |
Bending strength | 500MPa |
Tensile strength | 160MPa |
Resin curing wavelength peak | 365~420nm |
Products Introduction:
The self-developed UV-CRUable liner pipe is a dry hose made of glass fiber cloth and impregnated with UV-curable resin, which is mainly used for trenchless UV-curable pipeline repair and structural reinforcement of underground pipelines. When used, it needs to be pulled into the original pipeline, inflatable expansion close to the original pipeline, and then solidified under ultraviolet light to form a lining pipe with high strength.
At present, the workshop has high production efficiency, and a single shift can produce 250 meters, especially suitable for large-scale official website emergency project procurement. At present, the largest diameter DN1800 Lined hose, has realized the process breakthrough in the industry, non-standard diameter production experience, technology stability at the same time, quality assurance, short production cycle, domestic cities can reach the construction site in 7 days.
Products Feature:
The repaired pipeline structure meets or exceeds the strength, stability and deformation requirements
The repaired pipeline is smooth and meets the flow capacity requirements
The service life of the repaired pipeline is more than 50 years
Good ductility and fits the pipe wall
Good material stability, interruption of curing in the middle and restarting will not affect the curing effect
High cost performance compared to imported materials
Higher curing speed than imported materials, up to 2m/min
Product Parameter:
| Test Item | Technical Requirements | Unit | Inspection Results |
| Bending strength at first break | > 125 | Mpa | 476 |
| Flexural modulus | > 8000 | Mpa | 17765 |
| Longitudinal tensile strength | > 80 | Mpa | 170 |
Construction Site:
Certifications:
Our Factory:
FAQ