Swipe or use the arrows to view product images.
Eco-Friendly Protective Adhesive Lined Dual Wall Heat-Shrinkable Tube Tubing
| Price | $9.99 |
|---|---|
| Min Order | 1000 Meters |
| Availability | In Stock |
| Shipping From | Jiangsu, China |
| Popularity | 384 people viewed |
Model NO.:
CL-DWT
Application:
Automotive Harnessing, Communication industry, Machine Protection, Wire & Cable Protection, Electronics,Automobile,Wind Power,Machinery
Color:
Black,Transparent&Customized
Flexibility:
Flexible
Inner Diameter:
3.2mm-60mm,Accept Customization
Material:
PE/EVA
Maximum Voltage:
600V
Outer Diameter:
-
Thermal Rating:
-40ºC-125ºC
Thickness:
-
Operating Temperature:
-40ºC-125ºC
Flammability:
UL94 Hb, GB 8410
Certification:
IATF 16949
Specifications:
RoHS,Reach,Elv
Shrinkage Temperature:
80ºC-120ºC
Trademark:
Changli
Transport Package:
Carton
Specification:
Customizable
Origin:
Changzhou
HS Code:
39173200
Product Description
| Item | CL-HFT(KC) | |
| Continuus Temperature Range | -40ºC-125ºC | |
| Specifications | •EN45545 R22/23 HL3 •ROHS2.0,REACH,ELV,POPs,PAHs •ASTM D2671/UL 224/ASTM D257 | |
| Radial Shrinking Ratio | 2:1,3:1,4:1 | |
| Recommended shrink temp. | 80ºC-120ºC | |
| Tensile Strength | ≥10.4MPa | |
| Elongation Ratio | ≥200% | |
| Volume Resistivity (Ω·cm) | IEC 60093 ≥1013 | |
| Dielectric Voltage Withstand | 600V | |
| Cold Bend | No cracking | |
| Heat Shock | No drops, no flowing and no cracking. | |
| Dielectric Strength(kv/mm) | ≥15k | |
| Features | •Irradiation crosslinked polyolefin material •Soft, Elastic & Environmental •The inner wall is slotted to make the shrinkage more compliant. | |
| Size | As supplied(mm) | After full recovery(mm) | ||
| Inside diameter (D) | Wall-thickness (t) | Inside diameter (d) | Wall-thickness(T) | |
| 3.2/1.0 | 3.20+0.60 | 0.42±0.15 | ≤1.00 | 1.00±0.20 |
| 4.8/1.6 | 4.80+0.60 | 0.43±0.15 | ≤1.60 | 1.10±0.20 |
| 6.4/2.1 | 6.40+0.60 | 0.45±0.15 | ≤2.10 | 1.20±0.25 |
| 7.9/2.6 | 7.90+0.70 | 0.50±0.20 | ≤2.60 | 1.30±0.25 |
| 9.5/3.1 | 9.50+0.80 | 0.50±0.20 | ≤3.10 | 1.35±0.25 |
| 10.5/3.5 | 10.50+0.80 | 0.54±0.20 | ≤3.50 | 1.40±0.25 |
| 12.7/4.2 | 12.70+0.80 | 0.65±0.25 | ≤4.20 | 1.75±0.30 |
| 15.7/5.2 | 15.70+0.90 | 0.65±0.25 | ≤5.20 | 1.75±0.30 |
| 19.1/6.3 | 19.10+1.00 | 0.75±0.30 | ≤6.30 | 2.00±0.40 |
| 25.4/8.4 | 25.40+1.20 | 0.80±0.35 | ≤8.40 | 2.25±0.45 |
| 30.0/10.0 | 30.00+2.00 | 0.85±0.35 | ≤10.00 | 2.35±0.45 |
| 40.0/13.0 | 40.00+2.00 | 0.85±0.35 | ≤13.00 | 2.40±0.45 |
| 45.0/22.5 | 46.00±2.00 | 1.05±0.40 | ≤22.50 | 2.40±0.55 |
| 50.0/25.0 | 51.00±2.00 | 1.10±0.45 | ≤25.00 | 2.40±0.55 |
| 60.0/28.0 | 61.00±2.00 | 1.15±0.45 | ≤28.00 | 2.50±0.55 |
(Orders for products with special specifications are acceptable).
Application: The outer layer of the dual wall heat shrinkable tube with glue has the function of insulation and flame retardant, and the inner layer of hot melt adhesive can buffer mechanical strain and seal performance. It is mainly used in various wiring harnesses, marine wires and cables, and metal pipes that need to be sealed, insulated, bundled and fixed where waterproof, moisture-proof and corrosion-resistant are required. Halogen-free environmentally friendly continuous identification sleeve, widely used in electronics, communications, automobiles, rail transit, construction, public facilities and other fields.
A: Our factory is located in Changzhou City, near Shanghai. Welcome to visit our company.
Q: Can I get samples?
A: If we have the samples you need in our stock, we can supply them, but postage could be paid by you. If you have cooperated with us, we can send samples free of charge.
If the samples you need is not in stock, we can also make it according to the drawings and requirements you provide. We will charge some sample preparation fee or mould fee. Our existing moulds are quite complete though.
Q: How about the payment?
A: T/T, L/C, ALI pay are accepted. Our customers usually pay 50% deposit in advance, then the balance pay before shipping.
Payment terms ae negotiable.
Q: What about the delivery time?
A: Conventional specification products will be returned on delivey date according to the quantity of orders.
Special specification products will be returned on delivery date according to the manufacturing time of the mould.
About 10-45 days after receiving deposit.
- Similar Products
Negotiable
100 Pieces (MOQ)
G10 Tube Epoxy Fiber Glass Tube Epoxy Sleeves Gasket for Oil Prospecting
Beijing Red Sun Technology Co.,Ltd.
Negotiable
50000 Meters (MOQ)
2753 Silicone Resin Insulation Tube
Xuchang Zhufeng Insulation Material Co., Ltd.
$2.00
100 Meters (MOQ)
Heat Resistance Thermal Protection Basalt Sleeve
NINGGUO BST THERMAL PRODUCTS CO., LTD.