Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Instruments & Meters > Other Instruments & Meters
Swipe or use the arrows to view product images.

Environmental Protection Data Collector (upload to the Environmental Protection Bureau system)

Price $1000.00
Min Order 1 Set
Availability In Stock
Shipping From Chongqing, China
Popularity 458 people viewed
Send Inquiry View Full Page
Model NO.:
JX-EPDC
After-sales Service:
Whole Life Technical Support
Warranty:
One Year
Power Supply:
220VAC, 50Hz
Power:
25W
Operating Humidity:
0-99%Rh
Protection Level:
IP65
Baud Rate Range:
1200-115200
Load Capacity:
24VDC/1A
Input Voltage Range:
0-5VDC
Trademark:
J&X
Transport Package:
Wooden Case
Specification:
251 * 206 * 87 mm
Origin:
China
HS Code:
9027100090
Product Description

Environmental protection data collector (upload to the Environmental Protection Bureau system)

 


Brief description: 
Environmental data collector (upload to EPA system) is a new generation of environmental monitoring and pollution source monitoring data collector, designed according to industrial standards, specially optimized for various requirements of environmental monitoring, and equipped with rich and complete communication interfaces.

The environmental data collector is a new generation of environmental monitoring and pollution source monitoring data collector. It is designed according to industrial standards and optimized for various requirements of environmental monitoring. It is equipped with a rich and complete communication interface, supporting LAN, ADSL, GPRS, CDMA, PSTN, etc., to meet the requirements of remote communication in different on-site environments.
       The environmental data collector is a data acquisition communication unit installed at the emission outlet of the pollution source. It collects various parameters of the pollution source through RS-232, RS-485, 4-20mA current signal, etc., and communicates with the remote monitoring center through GPRS/CDMA, ADSL, LAN and other communication methods.
       The default configuration of the environmental data collector is with Ethernet and GPRS, the analog acquisition signal is 4-20mA, and CDMA is not installed. If you need a different configuration, please specify it when ordering, and we will provide products that meet your specific requirements.

Feature:
1. 6 isolated RS-232 interfaces, , support Modbus protocol, and built-in multiple instrument protocols; 1 isolated RS-485 interface, support Modbus protocol, and built-in multiple instrument protocols; 8 analog input channels, 16-bit resolution, support 4-20mA current signal, 0-5V voltage signal, can be configured to input 4 4-20mA differential current signals, or 4 0-5V differential voltage signals; 8 isolated switch input channels, can accept voltage input up to 30VDC, 2 relay outputs,
2. Built-in Ethernet interface
3. Built-in GPRS communication module (optional CDMA)
4. 320 X 240 dot LCD, with 16 touch keys membrane keyboard
5. The built-in memory can save one year's historical data without losing it in case of power failure
6. Built-in rechargeable lithium battery, ensuring normal operation for at least 6 hours in case of power outage
7. Industrial-grade components are used, with high reliability and stability
8. Device code (firmware) can be upgraded remotely


Technical Parameters:
Power supply220VAC, 50HZ
Power25W
Operating temperature-20ºC - +70ºC
Operating humidity0-99%RH
Dimensions251 x 206 x 87 mm
Weight2KG
Protection levelIP65
baud rate range1200-115200
load capacity24VDC/1A
input voltage range0-5VDC

 

  • Similar Products
Full Page Contact Supplier
↑