Audited Supplier
JX-EPDC
Whole Life Technical Support
One Year
220VAC, 50Hz
25W
0-99%Rh
IP65
1200-115200
24VDC/1A
0-5VDC
J&X
Wooden Case
251 * 206 * 87 mm
China
9027100090
Product Description
Environmental protection data collector (upload to the Environmental Protection Bureau system)
Brief description:
Environmental data collector (upload to EPA system) is a new generation of environmental monitoring and pollution source monitoring data collector, designed according to industrial standards, specially optimized for various requirements of environmental monitoring, and equipped with rich and complete communication interfaces.
The environmental data collector is a new generation of environmental monitoring and pollution source monitoring data collector. It is designed according to industrial standards and optimized for various requirements of environmental monitoring. It is equipped with a rich and complete communication interface, supporting LAN, ADSL, GPRS, CDMA, PSTN, etc., to meet the requirements of remote communication in different on-site environments.
The environmental data collector is a data acquisition communication unit installed at the emission outlet of the pollution source. It collects various parameters of the pollution source through RS-232, RS-485, 4-20mA current signal, etc., and communicates with the remote monitoring center through GPRS/CDMA, ADSL, LAN and other communication methods.
The default configuration of the environmental data collector is with Ethernet and GPRS, the analog acquisition signal is 4-20mA, and CDMA is not installed. If you need a different configuration, please specify it when ordering, and we will provide products that meet your specific requirements.
Feature:
1. 6 isolated RS-232 interfaces, , support Modbus protocol, and built-in multiple instrument protocols; 1 isolated RS-485 interface, support Modbus protocol, and built-in multiple instrument protocols; 8 analog input channels, 16-bit resolution, support 4-20mA current signal, 0-5V voltage signal, can be configured to input 4 4-20mA differential current signals, or 4 0-5V differential voltage signals; 8 isolated switch input channels, can accept voltage input up to 30VDC, 2 relay outputs,
2. Built-in Ethernet interface
3. Built-in GPRS communication module (optional CDMA)
4. 320 X 240 dot LCD, with 16 touch keys membrane keyboard
5. The built-in memory can save one year's historical data without losing it in case of power failure
6. Built-in rechargeable lithium battery, ensuring normal operation for at least 6 hours in case of power outage
7. Industrial-grade components are used, with high reliability and stability
8. Device code (firmware) can be upgraded remotely
Technical Parameters:
| Power supply | 220VAC, 50HZ |
| Power | 25W |
| Operating temperature | -20ºC - +70ºC |
| Operating humidity | 0-99%RH |
| Dimensions | 251 x 206 x 87 mm |
| Weight | 2KG |
| Protection level | IP65 |
| baud rate range | 1200-115200 |
| load capacity | 24VDC/1A |
| input voltage range | 0-5VDC |
