Swipe or use the arrows to view product images.
Er201/Er304/Er308 Metal Wire Stainless Steel Welding Wire
| Price | $9.90 |
|---|---|
| Min Order | 5000 kg |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 542 people viewed |
Model NO.:
Er201 Er304 Er308
Type:
Stainless Steel Wire
Standard:
ASTM
Grade:
300 Series
Certification:
ISO
Shape:
Round
Technique:
Cold-Drawing
Surface Treatment:
Bright
Trademark:
DA YANG, OCEAN WELDING
Transport Package:
by Spool
Specification:
0.6mm, 0.8mm, 1.0mm, 1.2mm
Origin:
Zhejiang, China
HS Code:
831110
Product Description
Stainless Steel Wire Er201 Er304 Er308
DESCRIPTION:
ER308L is 21Cr-10Ni ultra-low carbon austenitic stainless steel gas shielded welding wire. It has excellent performance: good welding workability, stable arc, beautiful appearance, less spatter, and suitable for all-position welding.
APPLICATION:
It is used for welding ultra-low fabric 00Cr19Ni10 stainless steel structural parts, also be used for 0Cr18Ni10Ti corrosion-resistant stainless steel structural parts whose working temperature is lower than 300 ºC . Mainly used for the manufacture of synthetic fibers, fertilizers, petroleum and other equipment.
ATTENTION:
Mechanical Properties of Deposited Metal
DESCRIPTION:
ER308L is 21Cr-10Ni ultra-low carbon austenitic stainless steel gas shielded welding wire. It has excellent performance: good welding workability, stable arc, beautiful appearance, less spatter, and suitable for all-position welding.
APPLICATION:
It is used for welding ultra-low fabric 00Cr19Ni10 stainless steel structural parts, also be used for 0Cr18Ni10Ti corrosion-resistant stainless steel structural parts whose working temperature is lower than 300 ºC . Mainly used for the manufacture of synthetic fibers, fertilizers, petroleum and other equipment.
ATTENTION:
- Protective gas ratio recommended Ar+(1%-3%)O2
- Gas flow: 20~25L/min
- Dry elongation: 15~25mm
- Remove rust, moisture, oil, and dust from the solder joint
- In outdoor welding, appropriate windproof measures shall be taken when the wind speed is greater than 1.5m/s to prevent the generation of air holes.
| C | Mn | Si | Ni | Cr | Mo | |
| Standard | ≤0.03 | 1.0-2.5 | 0.3-0.65 | 9.0-11.0 | 19.5-22.0 | ≤0.75 |
| Typical | 0.024 | 1.82 | 0.34 | 9.83 | 19.76 | - |
Mechanical Properties of Deposited Metal
| Tensile Strength | Elongation | |
| σb(Mpa) | δ5 (%) | |
| Standard | ≥550 | ≥30 |
| Typical | 560 | 45 |
- Similar Products