Swipe or use the arrows to view product images.
Factory Price Automatic Continuous Control 10V-300V 100A Battery Discharge Tester
| Price | $1.00 |
|---|---|
| Min Order | 1 Set |
| Availability | In Stock |
| Shipping From | Chongqing, China |
| Popularity | 263 people viewed |
Model NO.:
XDC
After-sales Service:
Lifetime
Warranty:
12 Months
Type:
Batteries Monomer Tester
Test Region:
Charge and Discharge
Application:
Lead-acid Battery
Customized:
Customized
Output Voltage:
DC10-300V
Output Current:
0-100A
Display:
Digital
Operation Mode:
Through The Panel Directly
Test Mode:
Automatic
Communication with PC:
Yes
Data Storage:
2g
Keywords:
Battery Discharge Tester, Battery Load Bank, etc.
Usage:
Test Performance of Battery Pack
Packing Dimension:
500mm*300mm*450mm
Gross Weight:
25kg
Power Supply:
220V, 50Hz
Trade Term:
EXW, Fob, DDU, CNF, CIF, etc.
Delivery Lead Time:
15 Days
Shipping Method:
by Express
Trademark:
Delta
Transport Package:
Veneer Case
Specification:
500mm*300mm*450mm
Origin:
China Mainland
HS Code:
9031809090
Product Description
Xdc Automatic Continuous Control 10V-300V 100A Battery Discharge Tester
1. Structure
XDC Battery Discharge Tester can serve as discharge loads and realize discharge with the set constant currents by means of continuous control over discharge currents.
When the voltage of a battery pack or a single battery is lower than the limit of voltage, or the set discharge duration or reach the set discharge capacity during discharge, the tester will automatically stop discharge and record the real-time data of all valuable and continuous process.
The voltage information of single batteries monitored by the tester is subject to wireless repeater access that is simple, secure and accurate.
With strong software, the setup and data treatment can be done through the touch screen. The process data can be read and upload to computer for analysis.
When the voltage of a battery pack or a single battery is lower than the limit of voltage, or the set discharge duration or reach the set discharge capacity during discharge, the tester will automatically stop discharge and record the real-time data of all valuable and continuous process.
The voltage information of single batteries monitored by the tester is subject to wireless repeater access that is simple, secure and accurate.
With strong software, the setup and data treatment can be done through the touch screen. The process data can be read and upload to computer for analysis.
| Item Name | XDC Automatic Continuous Control 10V-300V 100A Battery Discharge Tester |
| Applicable battery | Lead-acid battery |
| Output voltage | DC10-300V |
| Output current | 10~19V: 0~50A 19~180V: 0~100A 180~300V: 0~50A |
| Operating mode | Use the tester independently or with a constant-current module |
| Protection performance | Input terminal overvoltage protection, prompts on the LCD; Reverse polarity protection, buzzer alarm; Overcurrent protection, prompts on the LCD; 85ºC overheat protection, prompts on the LCD, buzzer alarm. |
| Single battery voltage acquisition | The 433RF wireless module supports a communication distance longer than 100 m and monitoring for single battery voltages of 2V, 4V, 6V and 12V. If the total voltage is not beyond the set value, each battery pack will have an unlimited single battery quantity and can monitor one to sixteen RF wireless monitoring modules at the same time. One RF wireless monitoring module can monitor 12 single batteries at the same time. |
| Control accuracy | Discharge current: ≤±1%; battery pack's terminal voltage: ≤ ±0.5%; single battery voltage: ≤±0.1% |
| Communication with PC | RS485 interface |
| Data storage | 2Gbit FLASH |
| Operating conditions | |
| Cooling | Forced air cooling |
| Temperature | Operating temperature: -5~50ºC; storage temperature: -40~70ºC |
| Humidity | Relative humidity: 0~90% (40±2ºC) |
| Noise | <60dB |
| Operating power supply | |
| Voltage | 220V AC (-20%~+30%); frequency: 45~65Hz; |
| Withstand voltage test | Input--casing: 2200Vdc 1min Input--output: 2200Vdc 1min Output--casing: 700Vdc 1min |
| Safety | Compliance line with EN610950 |
| Wiring | |
| AC output | Male socket in line with the applicable national standard, applicable to 1~1.5mm2 cable |
| DC output | 25mm2 cable quick plug (red: positive; black: negative) |
2. Software
The left photo is main menu of the tester.
The software can analyze data of total voltage, discharge current and single batteries' voltages, generate corresponding data reports, curves, graphs and reports indicating the battery pack performance directly and support queries and printing of these contents.
The software can analyze data of total voltage, discharge current and single batteries' voltages, generate corresponding data reports, curves, graphs and reports indicating the battery pack performance directly and support queries and printing of these contents.
System Setup
3. Data Management
The left photo is "Test Status", the right photo is "Curve Display".
Warranty period for all products is One year;
Within warranty period, all quality problems of the instrument shall be repaired by our company free of charge;
Beyond warranty period, our company shall be responsible for life-time maintenance, only the cost of the accessories will be charged;
User manual will be sent with the tester, some testers have demo for review.
If users have question on operation, we supply on-line video training. Users can also come to our factory to get free training.
- Similar Products
Negotiable
1000 Pieces (MOQ)
Universal Battery Tester (TBC-12)
SHANGHAI FUTURESUN ELECTRONIC CO., LTD.