Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

Factory Price Dust-Free, Clean and Precise Tunnel Oven for Industrial and Laboratory Use.

Price $100000.00
Min Order 1 Piece
Availability In Stock
Shipping From Jiangsu, China
Popularity 387 people viewed
Model NO.:
FJCO-H10-4S
After-sales Service:
After-Service Is Provided
Warranty:
12 Months
Movement Way:
Combined
Heating Mode:
Convective
Material Status:
Strap
Drying Medium:
Air
Operation Pressure:
Atmospheric Pressure
Type:
Multistage
Model No:
Fjco-H10-4s
Temp.Constancy:
+/- 1 Degree Celsius
Production Speed:
0.3-3.0m/Min
Dust-Free Grade:
Class100
Internal Material:
SUS430# Stainless Steel
External Material:
Baked Enamelled Steel Plate
Insulation:
Fiberglass Wool
Circulation:
Circle Fan
Machine Size:
Heating Section 2000mm Each
Temperature Range:
+40~200ºC
Conveyor:
Pet-Film&Coverlen
Temperature Uniformity:
± 3 ºC
Trademark:
FanQi
Transport Package:
Plywood Case Meets The International Standard
Specification:
multistage
Origin:
Kunshan, China
Product Description

Product Description

Other Specification
Conveyor systemThe bottom surface touches the conveyor mesh during handling. There is no contamination and scratching of the material during the conveying process. The products are transported smoothly in the furnace without shaking and jamming.
Temperature rangeMax: 40 ºC -200 ºC, commonly used below 160 ºC, * temperature 200 ºC.
Temperature uniformityTemperature uniformity of not more than ± 3 ºC (except near the feed, discharge port), constant temperature stabilisation of the empty furnace left, middle and right three points through the furnace test, the start of the air supply motor are starting to send
Heating deviceThe use of medium-wave quartz electric heaters, fast heating and drying firm.
Air supply modeHot air blowing from top to bottom, special air circuit structure design, the temperature inside the box is uniform.
Conveyor systemAdopting Tai Li speed reducer motor drive through the reducer, frequency converter, gear chain drive, composed of a complete transmission system.
Temperature outside the machineBelow 45ºC.
Control systemSiemens PLC system + Siemens touch screen can be connected to the MES system.
WeightSbout 800Kg/m
 Power supplyAC380V  3Φ  50HZ 

Our Advantages


1. Exhaust volume MAX: 10.0M3 / Min (customers to provide the receiver outside the furnace) centralised exhaust pipe diameter ∮ 100mm * 6PCS for easy on-site installation, and the appearance of the neat and clean, exhaust temperature of 150 ºC or less.

2. PET-FILM&COVERLEN, mesh belt width 1000mm, beige special temperature and wear-resistant rubbing, 04#25 specifications, bullnose connector. The height of the conveyor surface of the mesh belt from the ground is 980±20mm.

3. The bottom surface touches the conveyor mesh during handling. There is no contamination and scratching of the material during the conveying process. The products are transported smoothly in the furnace without shaking and jamming.

4. 128K high-density aluminosilicate environmentally friendly thermal insulation cotton (white ceramic cotton) door using high-temperature-resistant silicone forced tightly sealed, no leakage elasticity.

5. Phase sequence error protection, overload protection, control line protection, abnormal emergency stop, over-temperature protection.

6. Highly customisable.

7. Best after-sales service: one year free parts maintenance.

Company Profile

 

FAQ




If you are interested in any of our company's programs, please contact me or send me an e-mail!
For more product information, please go to the homepage.



 
  • Similar Products
Full Page Contact Supplier