$210.00
10 Pieces (MOQ)
DIN 24255 End Suction Low Cost Centrifugal Pump
Eifel Pump(Fuzhou) Corporation Ltd.
Swipe or use the arrows to view product images.
Factory Price High Performance Heavy Duty High Head Centrifugal Slurry Pump 20+ Years Experience
| Price | $9000.00 |
|---|---|
| Min Order | 1 SET |
| Availability | In Stock |
| Shipping From | Hebei, China |
| Popularity | 291 people viewed |
Model NO.:
LMH-4
After-sales Service:
Providing 24/7 Support
Warranty:
12 Months
Max.Head:
100 M
Max.Capacity:
1025 M3/Hr
Driving Type:
Motor
Impeller Number:
Single-Stage Pump
Working Pressure:
Low Pressure Pump
Influent Type of Impeller:
Single Suction Pump
Position of Pump Shaft:
Horizontal Pump
Pump Casing Combined:
Horizontal Split Pumps
Mounting Height:
Suction Centrifugal
Impeller:
Closed
Usage:
Slurry Pump
Factory:
Yes
OEM:
Yes
Lead Time:
3 - 5 Days
Application:
Pumping Hydrocyclone Feed and Sand, as Well as Reg
Trademark:
LONGTENG PUMP
Transport Package:
Plywood Case
Specification:
1-6 inches
Origin:
China
HS Code:
84137099
Product Description
Wet End:
• Impeller - Constant vane thickness allows for linear wear and enduring efficiency.
• Liner - Lightweight casing fasteners for quick-and-easy maintenance.
• Throat Bush - Adjustable suction liner assembly.
• Back Liner - Matching impeller and inlet flow lines, reduce inlet losses and wear, with increased efficiency.
The impeller is the main rotating component which normally has vanes to impart the centrifugal force to the liquid.
Most slurry pump casing are "slower" than their water pump cousins, primarily to reduce wear though lower internal velocities.
Wear resistant cast alloys are used for slurry pump liners and impellers where conditions are not suited to rubber, such as with coarse or sharp edged particles, or on duties having high impeller peripheral velocities or high operating temperatures.
Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts.
High efficiency and high head designs are also available.
| Type | Max. power, kW | Flow, m3/hour | Head, m | Eff, % | Impeller diameter, mm | |
1.5/1 C-HH | 30 | 16.2-34.2 | 25-92 | 20 | 330 | |
3/2 D-HH | 60 | 68.4-136.8 | 25-87 | 47 | 457 | |
4/3 E-HH | 120 | 126-252 | 12-97 | 50 | 508 | |
6/4 S-HH | 560 | 324-720 | 30-118 | 64 | 711 | |
6 S-H | 560 | 468-1008 | 20-94 | 65 | 711 | |
- Similar Products
$1200.00
1 Piece (MOQ)
Mining Slurry Pump High Head Centrifugal Slag Mud Pump
Hebei Tobee Pump Co., Ltd.