Swipe or use the arrows to view product images.
Floor Material Detection Sensor Digital Output with MCU Embedded Ultrasonic Sensor Original Manufacturer Io COM
| Price | $8.00 |
|---|---|
| Min Order | 20 Pieces |
| Availability | In Stock |
| Shipping From | Sichuan, China |
| Popularity | 525 people viewed |
Model NO.:
HT-300-UTD-MIR
Type:
High Frequency Ultrasonic Sensor
Output Signal Type:
Digital Type
Production Process:
Ceramics
Sensitivity:
High
Probe Type:
Dual Probe
Measuring Medium:
Air
Detection mode:
Echo Reflection
IP Rating:
IP67
Certification:
RoHS
Customized:
Customized
Trademark:
HTW
Transport Package:
1300PCS Per Package
Origin:
China
HS Code:
9031809090
Product Description
Appearance can be imitated, but quality can NEVER be imitated
| Parameter | Unit | Value |
| Installation height | KHz | 30±1mm |
| Driving frequency | KHz | 300±10kHz |
| Power-on delay | s | ≤30ms |
| The 2nd echo | V | ≥1.3V(1600) |
| Operating Voltage | VDC | 4.9~5.1 |
| Directivity | Deg | ≤12° |
| Working current | mA | ≤10mA |
| Interface Type(Default) | / | High and low level signal(3.3V) High level: ≥2.4V Low Level: ≤0.4V Max output current: 8mA Test frequency: ≤100Hz |
| Interface Type(Need to send command to switch to) | / | Communication mode: COM Data bit: 8 Bps: 115200 Check bit: None Stop bit: 1 |
| Connection | / | Connector: A1251H-4P/CJT with pin interval of 1.25mm |
| Precision | mm | ≤2mm |
| Shell material | -- | PC |
| Shell Color | -- | Black |
| Working temp. | ºC | 0~40ºC |
| The comparison of other models of floor material recognition sensor/transducer: | |||||
| Product | Output | Type | PCBA embedded | Algorism Pre-installed | Remark |
| HT-300PLT1612 | Analog signal | Transducer | NO | NO | Cheapest, R&D in algorism needed |
| HT-300PLT-A | Analog signal | Sensor | YES | NO | Cheaper, Signal amplified and filtered R&D in algorism needed |
| HT-300PLT-M | Digital signal (COM) | Sensor | YES | YES | Time-saving in algorism, directly set up the value for different floor materials to be able to differentiate |
| HT-300PLT-MIR | Digital signal (COM+I/O) | Sensor | YES | YES | Time-saving in algorism, the default mode is I/O, directly outputting the result for either hard or soft floor type, it can be switched to COM mode to set up threshold value for more floor material detection |
- Similar Products
$80.00
1 Piece (MOQ)
Edge Line Position Controll Sensor Us-400s
Zhejiang Longyou JL Electronic Co., Ltd