Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

Flow 4.5m3/S Head 12m Vertical Long-Axis Pump/Vertical Turbine Pump/Dewatering Water Pump

Price $1000.00
Min Order 1 Piece
Availability In Stock
Shipping From Beijing, China
Popularity 549 people viewed
Model NO.:
1200HBSA-12
After-sales Service:
Provide Technical Support
Warranty:
12months
Max.Head:
>150m
Max.Capacity:
>400 L/min
Driving Type:
Motor
Impeller Number:
Multistage Pump
Working Pressure:
Low Pressure Pump
Influent Type of Impeller:
Single Suction Pump
Position of Pump Shaft:
Vertical Pump
Pump Casing Combined:
Verticaljoint Surface Pump
Mounting Height:
Suction Centrifugal
Impeller:
Open
Usage:
Pump
Key Word:
Vertical Mixed Flow Pump
Type:
1200hbsa-12
Flow:
4.5(M3/S)
Head:
12.0(M)
Shaft Power:
623.2(Kw)
Speed:
495
Efficiency:
85(%)
Trademark:
AVESPEED
Transport Package:
Foam Plate Packaging/ Wooden Case Packing
Specification:
flow: 4.5m3/s, head 12m
Origin:
Beijing, China
Product Description
1200mm Outlet diameter vertical long-axis mixed flow pump/Vertical Turbine Pump
General introduction and application:
LP Type Long-axis Vertical Discharge Pump is mainly used for pumping sewage or waste water which are non corrosive, at the temperature lower than 60Co and of which suspended substances are free of fibers or abrasive particles, content is less than 150mg/L.
On the basis of LP Type Long-axis Vertical Discharge Pump. LPT type is additionally fitted with muff armor tubing with lubricant inside, serving for pumping of sewage or waste water, which are at the temperature lower than 60Co and contain certain solid particles, such as scrap iron, fine sand, coal powder, etc.
LP(T) Type Long-axis Vertical Discharge Pump is of wide applicability in the fields of public work, steel and iron metallurgy, chemistry, paper-making, tapping water service, power station and irrigation and water conservancy, etc.

The packing and shipping:
1. The equipment suitable for transportation and safety requirements, for large parts, using nude, equipped with the necessary protection device, all the packing scheme should be submitted to the owner approval and can use, and signed the corresponding symbol can shipment, which avoid to deformation and damage in transit.
2. All joints, valves, flange, bolts and other spare parts have protection device and measures, in order to prevent the damage, corrosion, sundry into parts during transportation and storage.
3. All electronic, electrical and instrumentation equipment must be strictly packaging, to ensure safety during transportation and storage, and to prevent the equipment be damp and flooding.
 
Items
 
Parameter name
 
Unit
 
Working condition
1 type 1200HBSA-12
2a single pump flowm 3 /s4.5
3headm12.0
4shaft powerkw623.2
5speedR/pm495
6efficiency%85
7pump body design pressure/test pressureMPa0.25/0.4
8open headm21.5
9normal bearing vibration value(double amplitude value)mm≤0.071
10the minimum submerged depth from suction water bell mouthm2.39
 
  • Similar Products
Full Page Contact Supplier