Swipe or use the arrows to view product images.
Focus on Ceramic Fiber and Cellulose Fiber Used for Friction Material
| Price | $9.60 |
|---|---|
| Min Order | 1000 kg |
| Availability | In Stock |
| Shipping From | Hebei, China |
| Popularity | 265 people viewed |
Model NO.:
CF-1010, CF-1020, CF-1025, CF-1035 CMF-1040
Usage:
Iron Voltage Electric Material, Thermal Insulation Coatings, Friction Material, Packing Material, Filter Material, High Temperature Insulating Material
Temprature Classification:
1900℃, 1600℃, 1500℃
Chemical Composition::
SiO2, Al2O3.SiO2, Al2O3
Shape:
Particles
Manufacturing Technique:
Chop
Kind:
High Ahlmirla Fibre
The Average Fiber Length:
0.15--2.5mm
The Average Fiber Diameter:
4-9um
Color:
White or Greyish White
Softening Point:
>1750temperature
pH:
7
Shot Content;>120mesh:
<20
Fiber Diameter:
2-4um
Specific Gravity:
0.25-0.45G/M3
Fiber Moisture:
<0.1
Trademark:
Deyoute
Transport Package:
PP and Paper Bags on Pallets
Specification:
CF-1010, CF-1020, CF-1025, CF-1035
Origin:
Hebei, China
HS Code:
680690000
Product Description
Ceramic fiber(CF-1010 ,CF-1020,CF-1025,CF-1035)
Aluminum silicate fiber, raw materials to kaolin, coke gem, pyrophyllite and other high aluminum content of silicate ore as raw materials, silicon dioxide and alumina content is more than 96%.
Chemical composition :
| SiO2 | Al2O3 | Fe2O3 | Na2O+K2O |
| 45%-55% | 40-50% | 0.8%-1.0% | 0.2%-0.5% |
It has low heat conductivity, thermal stability, chemical stability, and no causticity. Brake linings made from ceramic fiber have high temperature resistance and decentrality, can be used in brake linings which requires high temperature resistance and heat recovery capacity, it also can be used in all types if mixer
Recommendatory dosage:
Brake drum: 20-35%
Brake disc: 10-25%
Technology Indicators:
CERAMIC FIBER(CF-1025):
| Project | Index(%) |
| The average fiber length | 0.15--2.5mm |
| The average fiber diameter | 4-9um |
| Fiber distribution | D50 |
| Specific Gravity | 0.25-0.45g/m3 |
| Fiber moisture | ≤1.0 |
| Fiber diameter | 2-4um |
| Fiber loss-on-ignition | <0.5,(800/H) |
| Softening Point | >1750Temperature |
| PH | 7 |
| Fiber Asbestos Content | 0 |
| Shot Content;>120mesh | <20 |
| Surface density(state of compression) | 0.13-0.20g/ cm³ |
| Project | Index(%) |
| The average fiber length | 0--1mm |
| The average fiber diameter | 4-9um |
| Fiber distribution | D50 |
| Specific Gravity | 0.45-0.55g/m3 |
| Fiber moisture | ≤1.5 |
| Fiber diameter | 2-4um |
| Fiber loss-on-ignition | <0.5,(800/H) |
| Softening Point | >1750Temperature |
| PH | 7 |
| Fiber Asbestos Content | 0 |
| Shot Content;>120mesh | <30 |
| Surface density(state of compression) | 0.25-0.40g/ cm³ |
| Project | Index(%) |
| The average fiber length | 0.10--2.0mm |
| The average fiber diameter | 4-9um |
| Fiber distribution | D50 |
| Specific Gravity | 0.25-0.35g/m3 |
| Fiber moisture | ≤1.0 |
| Fiber diameter | 2-4um |
| Fiber loss-on-ignition | <0.5,(800/H) |
| Softening Point | >1750Temperature |
| PH | 7 |
| Fiber Asbestos Content | 0 |
| Shot Content;>120mesh | <25 |
| Surface density(state of compression) | 0.25-0.35g/ cm³ |
Package:
25kg*40nos packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .
Storage:
Ceramic Fiber must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.
Industrial Safety and Environment Protection:
- Risk of explosion by static sparks or ignition sources
- Use only explosion -proof equipment .
- Use with local exhaust ventilation.
- Wear protective eyeglasses or chemical safety goggles .
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.
Cellulose Fiber:
It is made of high quality newsprint crushed, with moderate price and no environmental pollution. It is a high quality asbestos substitute, suitable for non-asbestos friction materials, especially for ceramic fiber and other mineral fiber reinforced friction materials.Cellulose fiber
Main components: Nature Cellulose
Characteristics and application:Easily dispersed, no need pre-open-processing, good cold-enhancing effect and high intensity, it can improve the intensity of the brake linings and used better than other products.
Recommendatory dosage: Brake drum: 5-20% ,Brake disc: 3-10%
Technology Indicators:
| Project | Indicators |
| Appearance | Gary White |
| Specific Gravity | 1.4g/ cm³ |
| Loose Density | 600-800 cm³/100g |
| Fiber length | 0.65-1.8mm |
| Surface density(state of compression) | 0.16-0.19g/ cm³ |
| 105ºC Volatiles | <10.9% |
| 800ºC Calcination | <0.9% |
| Fiber diameter | 3-12μm |
| P H | 5.1 |
| Main ingredients | H 7% C 41% O 52% |
Package:
10-12kg/bag packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .
Storage:
Mineral Fiber must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.
Industrial Safety and Environment Protection:
- Risk of explosion by static sparks or ignition sources
- Use only explosion -proof equipment .
- Use with local exhaust ventilation.
- Wear protective eyeglasses or chemical safety goggles .
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.
- Similar Products