Swipe or use the arrows to view product images.
Fuootech Hfo Fcf-1500 Customized PLC Centrifuge Separator Engine Oil Disc Centrifugal Oil Purifier
| Price | $25000.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Chongqing, China |
| Popularity | 504 people viewed |
Model NO.:
FCF Centrifugal Oil Purifier
Certification:
ISO9001, CE
Application:
Turbine Oil, Lubricant Oil, Engine Oil, Fuel Oil
Voltage:
380V
Condition:
100% Brand New
Treatment Capacity:
1200 ~ 7000 Lph
Heater Power:
30 ~ 120kw or Above, as Per Request
Heater Temperature:
40 ~ 70 Degree C
Working Pressure:
Less Than 0.3 MPa
Certificate:
CE, ISO, CCC, SGS
Sludge-Discharge:
Automatic
Cleanness:
Nas 6 Grade
Power Supply:
380V, 50Hz, 3pH (Customized)
Trademark:
FUOOTECH
Transport Package:
in Standard Exportation Plywood Case
Origin:
Chongqing, China
Product Description
High Efficiency Automatic Marine Fuel Oil Purifier Lube Oil Centrifuge Purifier
The centrifugal oil filter is assembled according to the requirements of shipowners, design institutes, shipyards or land users, and according to the separator system diagram confirmed by the other party, the separator, electrical equipment and related accessories are assembled. This unit is used to separate and purify fuel oil and lubricating oil in ship diesel engine fuel and lubricating oil systems. It can also be used to separate and purify fuel oil, lubricating oil and turbine oil in land power stations and diesel-generator systems.
The operating system of this machine is fully automatic control.The separator head in this machine has been accurately dynamically balanced and has minimal vibration. It can run for a long time and is safe and reliable to use.
| Model | Unit | FCF-1000 | FCF-1500 | FCF-2000 | FCF-3000 | FCF-4000 | FCF-6000 | FCF-8000 | |
| Capacity | L/hr | 1000 | 1500 | 2000 | 3000 | 4000 | 6000 | 8000 | |
| Running speed | r/min | 8000 ~ 9500 | |||||||
| Working Pressure | MPa | ≤0.3 | |||||||
| Temperature | ºC | 0 ~ 100 | |||||||
| Power Supply | 380V, 50HZ, 3PH (Customized) | ||||||||
| Sludge-discharge | Automatic | ||||||||
| Water-discharge | Manual/Automatic | ||||||||
| Continuous working time | ≥150h | ||||||||
| Trouble-free working time | ≥5000h | ||||||||
| Noise | dB(A) | ≤80 | |||||||
| Heater Power (if included) | kW | 24 | 30 | 36 | 42 | 60 | 78 | 90 | |
| Total Power | kW | 27 | 33 | 39 | 46 | 66 | 86 | 101 | |
| Inlet & Outlet Diameter | mm | DN20 | DN20 | DN25 | DN32 | DN32 | DN42 | DN50 | |
| Weight | Kgs | 580 | 650 | 760 | 850 | 980 | 1100 | 1400 | |
| Dimension | L | mm | 1300 | 1380 | 1400 | 1450 | 1550 | 1660 | 1750 |
| W | mm | 900 | 1000 | 1100 | 1150 | 1230 | 1350 | 1400 | |
| H | mm | 1400 | 1460 | 1500 | 1580 | 1650 | 1750 | 1800 | |
| After treatment | Water content: ≤ 100ppm | ||||||||
| Particles: ≤ 5μm | |||||||||
| Cleanness: NAS 6 grade | |||||||||
2. All the specs can be customized according to client's requirements.
Solid particles in the liquid will slowly settle to the bottom of the container under the influence of gravity. As shown in the figure, the deposition rate depends on the depth of the liquid. In order to speed up this rate, the only way is to reduce the depth of the liquid and increase the sinking area of the tank. As the heavier material sinks, the lighter liquid rises to achieve separation. In the ultra-high-speed rotating container, there are dozens of laminations with small gaps between each other. This gap makes the liquid depth described in gravity separation very small. Under the condition of high-speed rotation, gravity is replaced by centrifugal force, which increases thousands of times in an instant. Liquids (water and oil) with different densities and extremely fine particles with higher density are rapidly moved under the action of this powerful centrifugal force. Separate and discharge the separator in different ways. There are two separator mechanisms for automatic slag discharge and regular manual slag discharge.
Q1. Are you a manufacturer, trading company or a third party? When and where did your factory established?
FUOOTECH: We are a manufacturer established since 2002, located at Chongqing city, China.
Q2. Will the products be tested before shipping?
FUOOTECH: Yes, of course. QC personal will have a strict testing procedure to all the products before shipping.
Q3. What's your warranty period?
FUOOTECH: We offer 12 months of warranty for all our products from the date of shipment. Even if the warranty period is expired, we still provide lifelong maintenance, technical service and spare parts supply.
Q4: What is the delivery time of your machine?
FUOOTECH: In general, the delivery time of our standard machine is about 15 days, customized machine will be delivered as the negotiation with our clients.
Q5. What is the usage of your centrifuge oil separator?
FUOOTECH: FCF Series Centrifuge oil separator can effectively separate the large quantity of water and particles from HFO, DO, LO, Turbine Oil, etc. shortly.
Q6. What is consumable?
FUOOTECH: There is no consumable except filters.
Q7. Who should I contact to get more information ?
FUOOTECH: FCF Series Centrifuge oil separator can effectively separate the large quantity of water and particles from HFO, DO, LO, Turbine Oil, etc. shortly.
Q6. What is consumable?
FUOOTECH: There is no consumable except filters.
Q7. Who should I contact to get more information ?
- Similar Products
$20000.00
1 Set (MOQ)
Mobile Transformer Oil Purification Machine (ZYD-50)
Chongqing TOP Oil Purifier Co., Ltd.