Hbms-3000c Digital Electronic Durometer on-Line Hardness Test Solution Hardness Tester

Brief Description Of The Product

1. Door-type frame, solid structure, reliable

2. Force value closed loop, test force precision of 0.5%

3. Preset program, available for multi-point measurement

4. CCD system automatic measuring system, on-board test

5. Straight guide rail + ball wire bar, accurate positioning, strong bearing capacity

Model Overview

HBMS-3000C digital display gate electronic brucell hardness meter adopts advanced design concept, mechanical and electrical aspects are adopted advanced technology in the field of hardness meter, accurate test results, strong value repeatability, high degree of automation, low labor intensity, small human error, beautiful appearance, is one of the advanced brucell hardness meter in China.

This hardness meter can be used to determine cast iron, non-ferrous metals, annealing, conditioning and most of the supplied steel supply. At the same time, it is suitable for testing soft metals such as pure aluminum, copper, lead, tin, zinc and their alloys. Brinell hardness has high measurement accuracy, good recovery and representativeness. It is an indispensable hardness measurement instrument for mechanical metallurgy and measurement department.

Product Characteristics

1. The fuselage and workbench adopt precision casting process, strong structure, rigid, accurate, reliable, durable;
2. Portal frame, large movable workbench, the maximum moving distance of 1000mm;
3. The test mechanism adopts high-precision spoke pressure sensor; built-in precision pressure sensor, accurate, stable and reliable, and automatic compensation of test force.
4. Using the independently developed portal electronic Brinell hardness meter special CNC system, fast running speed, the full closed loop gradient from fast to slow applied test force, to ensure that the test force applied smooth without impact;
5. Using the contemporary advanced high-speed microprocessor, the instantaneous response is fast, to ensure that the test force accuracy is stable within ± 1%;
6. Stepper motor, high precision ball screw and linear guide rail; accurate positioning, simple maintenance;
7. Test force, load saturation time, feed speed and test speed can be artificially adjusted and controlled;
8. The test process is automatic, with no one responsible for the operation error;
9. The image processing system can capture the indentation, automatically display the Brinell hardness value, save the test data and generate and print the hardness test report. The hardness value can also be automatically converted, and the test data can be automatically saved in the database.
10. Precision as per GB / T231.2, ISO 6506-2, and US ASTM E10.

Applied Range

This hardness meter can be used to determine cast iron, non-ferrous metals, annealing, conditioning and most of the supplied steel supply.

At the same time, it is suitable for testing soft metals such as pure aluminum, copper, lead, tin, zinc and their alloys.

Main Technical Parameters

Brinell hardness has high measurement precision, good recovery and representativeness, and is an indispensable hardness measurement instrument for mechanical metallurgy and measurement department.     

Measurement Range: 5-650HBW

Test Force Levels: 750, 1000, 3000kgf (optional with 187.5, 250, 500)

Maximum Allowable Height Of The Specimen: 950mm (customizable)

Lateral Movement Distance Of Hardness Testing Institution: 650mm (customizable)

Workbench Size (Length * Width): 1500X1000mm (customizable)

Maximum Movement Distance Of Workbench: 1000mm (customizable)

Center Distance Between Two Pillars: 1350mm (customizable)

Maximum Load Capacity Of Workpiece Table: ≤ 5000kg (customizable)

Power Supply: 220V, 50Hz

External Dimensions: 2000x1500 x 2000 mm (subject to actual conditions)

Weight: 3000kg (subject to actual weight)

Accessory Box Standard

Host of Electronic Brinell Hardness Tester: one unit

Control Cabinet: one unit

Brand Computer: one unit

Brinell Automatic Measurement System: one set

20X Reading Microscope (JC-10): one unit

Hard Alloy Indenter (Φ5 And Φ10): one of each

Hard Alloy Steel Ball (Φ5 And Φ10): one of each

Standard Brinell Hardness Blocks (HBW100±25 And HBW200±25): one of each

The above is the standard configuration, actual configuration may vary based on custom requirements.