Swipe or use the arrows to view product images.
High Frequency Induction Heating Machine (HF-25KW)
| Price | $0.10 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Guangdong, China |
| Popularity | 383 people viewed |
Model NO.:
HF-25KW
Main Use:
Heating, Quenching, Forging, Melting, Welding
Power:
25kw
Frequency:
30-80kHz
Working, Retail, Cooling Time:
1-99s
Work Voltage:
380V, 400V, 415V, 440V, 480V
Product Name:
Induction Heating Equipment
Water Temperature Protection Point:
40c
Application:
Heater, Cooler, Vaporizer, Condenser
Structure Material:
Metal Material
Heat Transfer Surface:
Tubular Heat Exchanger
Principle:
Mixing Heat Exchanger
Trademark:
ORD
Transport Package:
Wooden Box
Specification:
CE, ISO
Origin:
China
HS Code:
8514400090
Product Description
High Frequency Induction heating equipment HF-25KW
Advantage:
1 More than ten years experience, stable and goods performance
2 CE certificated
3 Copperated with CHOW TAI FOOKS, Matsushita, Foxconn, Media, Gree and ZHIGAO Air conditioner.
4 Suitable for a large range, heating, quenching, forging, melting, solding and so on.
5 Two transformer ratios, can match better different length induction coil
6 Siemens IGBT
7 IXYS Bridge
8 DELIXI Switch
Main characteristics:
2. Main characteristics:
1)Infineon IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
2) 100% Duty cycle, continuous working is allowed at maximum power output.
3) Display of heating power and heating current and oscillating frequency.
4) Simple to install, Installation can be done by unprofessional person very easily;
5) Light weight
6 ) Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability;
7) The separated models are designed to fit the dirty surrounding of some cases.
8)Heating time can set 1-999S also can set 0.1-99.9S.
9)Water pressure meter install the machine, can check water pressure at the meter, easy to know whether your cooling system is enough or not.
10) Energy Saving Up to 20-30% compare with SCR machine.
11) Soft Switch Technology And prefect Protection system( Over Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water) enhance Good Reliability.
12) 4 Different working modes:
P0: Means work at the manual, the machine will Sequential timing, Timer 1 shows the heating time, Timer 2 shows working frequency, when you Press, then the machine stop it. If use the Foot Switch, Step On the Foot Switch not loose it, then the machine is working, loose the foot switch, then the machine stop heating.
P1: Means Work at time we set it before heating, Timer 1: means heating time( this is countdown count time, Timer 2: Display Working Frequency. For example: If you set heating time 20S, the machine will countdown count time, when finish 20S then stop the machine automatically. If use the foot switch, Step on the foot switch then loose is at once, the machine is working, when finish the heating time that we set, then the machine stop it automatically.
P2: 2 Sections Heating( Section 1 for heating, section
Technical Parameters:
Advantage:
1 More than ten years experience, stable and goods performance
2 CE certificated
3 Copperated with CHOW TAI FOOKS, Matsushita, Foxconn, Media, Gree and ZHIGAO Air conditioner.
4 Suitable for a large range, heating, quenching, forging, melting, solding and so on.
5 Two transformer ratios, can match better different length induction coil
6 Siemens IGBT
7 IXYS Bridge
8 DELIXI Switch
Main characteristics:
2. Main characteristics:
1)Infineon IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
2) 100% Duty cycle, continuous working is allowed at maximum power output.
3) Display of heating power and heating current and oscillating frequency.
4) Simple to install, Installation can be done by unprofessional person very easily;
5) Light weight
6 ) Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability;
7) The separated models are designed to fit the dirty surrounding of some cases.
8)Heating time can set 1-999S also can set 0.1-99.9S.
9)Water pressure meter install the machine, can check water pressure at the meter, easy to know whether your cooling system is enough or not.
10) Energy Saving Up to 20-30% compare with SCR machine.
11) Soft Switch Technology And prefect Protection system( Over Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water) enhance Good Reliability.
12) 4 Different working modes:
P0: Means work at the manual, the machine will Sequential timing, Timer 1 shows the heating time, Timer 2 shows working frequency, when you Press, then the machine stop it. If use the Foot Switch, Step On the Foot Switch not loose it, then the machine is working, loose the foot switch, then the machine stop heating.
P1: Means Work at time we set it before heating, Timer 1: means heating time( this is countdown count time, Timer 2: Display Working Frequency. For example: If you set heating time 20S, the machine will countdown count time, when finish 20S then stop the machine automatically. If use the foot switch, Step on the foot switch then loose is at once, the machine is working, when finish the heating time that we set, then the machine stop it automatically.
P2: 2 Sections Heating( Section 1 for heating, section
Technical Parameters:
| Type | HF-25KW |
| Work Power | 3*380v/415v/440v/480v 50-60hz |
| The range of operating voltage | 340-430V AC |
| Output power | 25KW |
| Input current | 28A |
| Fluctuating frequency | 30-80khz |
| Timing (Heat time,Retain time,Cool time) | 1-99S |
| The flow rate of cooling water | 0.15 Mpa 18L/Min |
| Water temperature protection point | 40centidegree |
| Duty cycle | 100% (40degree room temperature) |
| Weight | Mainparts:38Kg Transformer: 25 |
| Size | Main Parts:600*350*600MM Transformer: 550*300*500MM |
- Similar Products
$220000.00
1 Piece (MOQ)
Hot Air Generator for Protein Powder Drying
J. Parker Combustion Equipment(Jiangsu)Co., Ltd.
$1000.00
1 Piece (MOQ)
Non-Premixing Temperature Adjustment High Speed Gas Burner
Wuhan Aojie Technology Corporation