Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

High Quality Outdoor Metal Anti Corrosion Primer Epoxy Zinc Rich Primer

Price $5.11
Min Order 500 kilograms
Availability In Stock
Shipping From Jiangsu, China
Popularity 253 people viewed
Model NO.:
HX-067
Color:
Grey
Main Raw Material:
Epoxy
Other Names:
Epoxy Zinc-Rich Primer
Bulk Solids:
603%
Application Method:
Brush
Specific Gravity (After Mixing):
2.300.1kg/L
Selling Units:
Single Item
Usage:
Steel, Cast Iron, etc
Fully Cured:
7D
Mixing Ratio (Weight):
25:3 Stir Well with Mechanical Stirring
Typical Dry Film Thickness:
80um
Buik Solas:
603%
Typical Wet Film Thickness:
135um
State:
Liquid Coating
Single Gross Weight:
20.000 Kg
Theoretical Coating Rate:
0.307kg/M2/80um
Surface Stem:
1h
Trademark:
Jinglin
Origin:
Jiangsu, China
Product Description
Color
Grey
Mixing ratio (weight)
25:3 Stir well with mechanical stirring
Specific gravity (after mixing)
2.30±0.1kg/L
Bulk solids
60±3%
Typical dry film thickness
80um
Typical wet film thickness
135um
Theoretical coating rate
0.307kg/m²/80um
Surface stem
≤1h
Practical
≤24h
Fully cured
7d
Mixed use period
≤4h23±2
Diluent
Epoxy diluent
Applicable substrates
steel, cast iron, etc
Front-end coating
-
Back-end coating
Epoxy micaceous iron intermediate paint
Product Introduction
It is composed of epoxy resin, modified polyamide curing agent, ultra-fine zinc powder, additives and solvents. The metal zinc content in the dry film reaches more than 70%, which has excellent cathodic protection effect, and can provide long-term anti-corrosion protection for the coated object when used with epoxy coating, and the paint film is tough and dense, excellent damp and heat resistance, long-term corrosion resistance in the marine environment, and has excellent adhesion to the metal substrate.

Product Use:
The surface of steel equipment suitable for bridges, towers, petroleum, smelting, chemical and other industries in the harsh corrosive environment of industrial environment is used as the most basic anti-rust primer, and is used as a protective primer after shot blasting or sandblasting of steel plates.
Q1 Are you a manufacturer and support factory site visits?
A: We are a professional paint manufacturer with more than 30 years of experience and support buyers to visit our factory.

Q2 What are your main products?
A: Our main products are all kinds of industrial anti-corrosion coatings, marine coatings, floor coatings, new water-based
environmental protection coatings, automotive coatings and so on.

Q3 Is the coating product sold by your company in compliance with the relevant entry permit for each country?
A: All types of coating products produced by our company are in compliance with international relevant quality standards and requirements. For some countries, there are special access certification licenses. Our company will conduct targeted product verification.

Q4 Does your company still need an international agent to join?
A: To meet the requirements of customers, we welcome you to become our agent dealer, become our agent dealers will receive more favorable prices and account period support, specific operation details please contact our company account manager to confirm.
 
  • Similar Products
Full Page Contact Supplier