Swipe or use the arrows to view product images.
High Quality Pipe Material Barrier Nylon Acid and Alkali Resistant PA6t
| Price | $7.00 |
|---|---|
| Min Order | 1000 kg |
| Availability | In Stock |
| Shipping From | Shandong, China |
| Popularity | 370 people viewed |
Model NO.:
PA6T
CAS No.:
25750-23-6
Molecular Principal Chain:
Carbon Chain Polymer
Color:
Translucence
Type:
Polyamide Raw Material Granules
Material:
100% Nylon
Grade:
Injection Grade
Application:
Building, Automotive, Electronic, Household
Usage:
Injection, General Plastics, Engineering Plastics
Supply Ability:
800 Metric Tons Per Month
Certificates:
SGS
Physical Properties:
High Chemical Resistance High Mechanical Strength
Features:
Good Oil Resistance Good Impact Toughness
Trademark:
No Mark
Transport Package:
International Standard Package
Specification:
20kg/foil bag, 1000kg/carton box
Origin:
Shandong, China
HS Code:
3908101910
Product Description
Nylon 6T is an amorphous nylon resin which exhibits superior transparency, good barrier properties to gases, water, solvents and essentiaoils and high temperature structural properties, which make it suitable for consideration in a number of applications.
| High heat resistance | With a high glass transition temperature, high rigidity is maintained even in the high temperature environment of the engine room. |
| Excellent chemical resistance | Demonstrated the best chemical resistance of polyamides. |
| Small size change caused by water absorption | The size change of water absorption belongs to the lowest category of polyamides, more than 50% lower than PA66. |
Typical Characteristics:
√ Smorphous polyamide
√ Superior transparency
√ Good barrier properties
√ High toughness,high strength
√ High temperature resistance
√ Excellent mouldability
√ Superior transparency
√ Good barrier properties
√ High toughness,high strength
√ High temperature resistance
√ Excellent mouldability
It was widely used in Packacing Indutries
| 1. Blow Moulded Containers |
| 2. Iniection |
| 3. Non Oriented Film |
| 4. Oriented Film |
| 5. Paper Coating |
| 6. Tubes |
| 7. PA6I/6t into Nylon 6 or Nylon 66 |
| 8. Textile |
Injection molding advice and reference(for reference only):
1) Molding equipment
Equipment needs to consider the situation of wear (flame retardant grade is corrosion resistance).
Select a small device with a single injection volume ≥ 10% of the maximum injection capacity.
A standard nozzle will do.
2) Mold:
Also need to consider the selection of wear (flame retardant grade is corrosion resistant) steel.
The exhaust tank is about 10μm.
3) Prepare for drying
After opening, the product that has been exposed to air (has absorbed water) must be redried.
Dehumidifying dryer: The temperature is 100ºC,2~6h
4) Standard molding conditions
Barrel temperature:
NH 320 (315~335)
C3 320 (320~335)
C2 320 (315~335)
C1 310 (300~325)
Lower hopper :70 (50~ 90)
Mold (non-enhanced grade)120 (90~140)
Injection speed: medium speed
Injection pressure: medium pressure
Screw speed :150rpm
- Similar Products
$700.00
56 Tons (MOQ)
Tianjin Dagu Dg-700 PVC Resin for Pipe Fittings K57
Beijing TDD E-Commerce Co., Ltd.