Swipe or use the arrows to view product images.
Horizontal Universal Manual Metal Lathe Parallel Lathe Machine Kyyc-510
| Price | $5000.00 |
|---|---|
| Min Order | 1 Set |
| Availability | In Stock |
| Shipping From | Jiangsu, China |
| Popularity | 251 people viewed |
Model NO.:
KYYC-510
Warranty:
1 Year
Type:
Horizontal Lathe
Guide Rail:
Horizontal Guide Rail
Power Source:
Electric
Controlling Mode:
Artificial
Automatic Grade:
Manual
Setting Mode:
Table
Precision:
High Precision
Certification:
CE
Condition:
New
Spindle Hole:
52mm
Max. Swing Over Bed:
510mm
Max. Swing Over Cross Slide:
330mm
Length of Gap:
252mm
Effective Length of Gap:
200mm
Distance Between Centers:
1500mm
Bed Width:
360mm
Inside Taper of Spindle Bore:
Mt6
Gears Exchange:
2,25 Module
Power of Main Motor:
5HP
Trademark:
KY
Transport Package:
Wooden Case
Origin:
China
Product Description
| KYYC-410 | KYYC-510 | KYYC-660 | |
| Max. swing over bed | 410mm | 510mm | 660mm |
| Max. swing over cross slide | 240mm | 330mm | 360mm |
| Max. swing over gap | 590mm | 660mm | 760mm |
| length of gap | 252mm | ||
| Effective length of gap | 200mm | ||
| Distance between centers | 1000mm | 1500mm | 2200mm |
| Bed width | 360mm | ||
| front prism with 90 degrees inclined at 60 degrees from the front face of the busbar | |||
| Spindle hole | 52mm | ||
| Spindle nose Canlock | C6 | ||
| Inside taper of spindle bore | MT6 | ||
| Range of spindle speed (18 steps of forward and backward each) | 33 -2250r/min. | ||
| Longitudinal direction | 0. 042-8.64 | ||
| Range of thread cutting Metric mm | 0.5-88 | ||
| Inch n/1" | 72-0.4375 | ||
| Моdulе ил | 0.25-2 | ||
| Diameter n/n" | 144-1.25 | ||
| Gears Exchange | 2,25 Module | ||
| Max. travel of top slide | 95mm | ||
| Max. travel of cross slide | 200mm | 250mm | |
| Cross section size of tool shank | 20X20mm | 25X25mm | |
| Inside taper of tailstock sleeve bore | MT4 | ||
| Max travel of tailstock sleeve | 150mm | ||
| Power of main motor | 3HP | 5HP | 8HP |
OEM FEATURES:
Fully conventional mechanical lathe, intended for turning materials by revolution, equipped with a system for cosca machining with steps in millimeters, inches, diametralpit and module thread. With change gear with module 2.25, with advance and thread function being performed by the same spindle, which has protection constrained in rigid steel plate. Tempered and rectified busbar, 360mm wide, front prism with 90 degrees inclined at 60 degrees from the front face of the busbar, this one with a width of 40mm. Removable armhole with a length of 252mm.
- Similar Products