Menu
Suppliers Products
Global B2B sourcing platform
Verified suppliers and manufacturers
MadeInChina.com > Products > Industrial Equipment & Components > Pump & Vacuum Equipment > Centrifugal Pump
Swipe or use the arrows to view product images.

Horizontal/Vertical High Efficiency High Temperature Double Suction Axial Split Volute Casing Case Centrifugal Sea Water Pump by Duplex Stainless Steel,Titanium

Price $30000.00
Min Order 1 Piece
Availability In Stock
Shipping From Sichuan, China
Popularity 411 people viewed
Send Inquiry View Full Page
Model NO.:
S
After-sales Service:
on Line Video Guidance or Paid Site Service
Warranty:
One Year After Operation/18 Months After Shipment
Max.Head:
350 M
Max.Capacity:
16500 M3/H
Driving Type:
Motor
Impeller Number:
Single-Stage Pump
Working Pressure:
Middle Pressure Pump
Influent Type of Impeller:
Double-Suction Pump
Position of Pump Shaft:
Horizontal Pump
Pump Casing Combined:
Axial Split Casing
Mounting Height:
Suction Centrifugal
Impeller:
Closed
Usage:
Pump, Pumps, Circulating Pump, Water Pump
Materials:
Stainless Steel, Monel, 2205, CD4MCU
Manufacturer Level:
Top Level
Shaft Sealing:
Mechanical Seal and Packing
Pump Arrangement:
Pipe Hung, Horizontal
Pump Transmission:
Direct Coupled, Gear Box, V-Belts, Universal Joint
Flange Standard:
Customized
Motor Brand:
ABB, Siemens or Reputed Chinese Brands
Pump Bearing:
S-Kf, NSK or Reputed Chinese Brands
Trademark:
Gaofeng
Transport Package:
Standard Seaworthy Packing
Specification:
Customized
Origin:
China
HS Code:
8413709990
Product Description


Brief introduction:

ZSS type pump is a new generation of high performance single-stage double suction centrifugal split pumps.They are mainly used in delivering liquids of the water plant,air conditioner circulation water,heating pipe network system,building water supply,irrigation and drainage of pump stations,power plants,industrial water supply system,fire protection,ships industry and mine.

Parameters:
 
Flow rate:Q=22~16236 m3/h
Total head:H=7~300 m
Speed:n=980rpm/2950rpm
Solid parameter:≤80 mg/L 
Temperature:T=-20~200 ºC
Pump diameter:80~900 mm

Features:
  1. Using excellent hydraulic model, the efficiency of the pump is 2-3% higher than that of the same type, and the operating cost of the pump is reduced.  
  2. Unique high temperature design, the pump adopts intermediate support, thickened pump body, sealed cooling, bearing thin oil lubrication, so that the pump can be applied to the high 200ºC operating conditions, especially suitable for heating pipe network requirements  .
  3. The pump body part can be installed vertically or horizontally according to different working conditions, and the seal can be mechanical seal or packing seal.  
  4. The NPSHr is reduced by 1-3 m.
  5. It is unnecessary to adjust mechanical seals,so it is very easy and simple to replace them.
  6. It is rapid and simple to assemble and dismount the rotor parts due to using elastic prestress assembling.
Structure:
  1. The distance between the two ends of the pump is short, the pump runs stably, the vibration noise is small, and the speed can be increased properly, so that the pump can adapt to a wider range.  
  2. The inlet and outlet are in the same straight line, so that the pipeline layout is simple, convenient and beautiful.  
  3. The same rotor can run in reverse, reducing the risk of water hammer damage to the pump.
  4. It is unnecessary to make adjustment to any clearance when assembling.
Structure drawing is as below
  1. Construction section of type COS pump
          2. Construction section of type COS (L) pump
     

    Configuration:


    Application:
    1. It is suitable to pump clean water and fluids have close physical and chemical characters of water.
    2. widely used in sections of mining,city water supply,power plant water supply and drainage,farm irrigation and various water conservancy project.

    • Similar Products
    Full Page Contact Supplier
    ↑