Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

LPG Pump Liquefied Petrolum Gas Transfer Pump Factory Manufacturer

Price $200.00
Min Order 10 Pieces
Availability In Stock
Shipping From Zhejiang, China
Popularity 332 people viewed
Model NO.:
LPGP
After-sales Service:
Available
Warranty:
12 Months
Flow Rate:
Constant Pump
Type:
Oil Pump
Drive:
Electric
Performance:
High Pressure
Model:
Yqb
Theory:
Rotary Pump
Structure:
Single-Stage Pump
Pressure:
High Pressure
Application:
Liquefied Petroleum
Pump:
Transfer Pump Liquefied Gas
Specificati:
Standard
HS:
841311000
IP Class:
IP55
Trademark:
GOGOGO PUMP
Transport Package:
Wooden Case
Specification:
cast iron
Origin:
China
HS Code:
8413110000
Product Description


YQB series LPGP of liquefied petroleum gas pumps produced by our company are mainly used for transporting liquefied petroleum gas, propylene, liquid ammonia, or transporting various volatile liquids and petroleum products with similar properties.

The pump is a positive displacement vane pump, its structure is advanced, the stator surface is composed of composite curves, both ends of the mechanical seal, the fixed match end face are using "O" type sealing ring, the rotating movement of the matching parts are metal relative non-metal, with the use of safe and reliable, a multi-purpose function.

The pump type is positive displacement vane pump, the work depends on the centrifugal sliding of the blade, the flow rate is related to the speed of the shaft, the stator internal surface is made of domestic original composite curve, the stator and rotor, baffle, blade composed of ten sealing cavity, because the stator surface is a composite curve, when the rotor rotates, the volume of the inlet cavity gradually increases, and the formation of negative pressure to produce suction, so as to suck the oil. When the rotor is rotated at a certain Angle, the volume section is gradually reduced, so that the oil is hydraulic out, and there is an oil block between the oil suction chamber and the oil pressure chamber.

The blade is closely fitted with the inner surface of the stator by centrifugal force and two-baffle structure, so that the pump can work normally under rated state.


 

Working Principle:

Positive Displacement type vane pump

Main applications: 

LPG,Propylene,liquid ammonia

Driver:

Electric motor

Power Specs:

115V,220-240V,230/400V,380V-415V,220V/440V,380V/660V,575V  50Hz/60Hz

Installation position:

Horizontal

Casing/vane material:

Cast iron/EPGC vane

Seal

Mechanical seal

Motor power: 

1.5KW-30KW(2HP-40HP)

Temperature-40~+120ºC

Maximum discharge-side pressure:

1.6MPa(16bar)

Maximum head: 

160m

Flow rate range: 

1~100m3/h(4.4~440GPM)



Specification:
  Model Rotary  SpeedFlow  Rate   Working  Pressure Pressure  Difference 

Motor

Model

Motor  Power  Entrance Diameter Exit Diameter Tempreture Range
 Rpmm³/h Mpa MpaKWmmºC
YQB1-5   730   1     1.6     0.5YB90L-41.5      25      25   -40~+80
YQB2-5   930   2     1.6     0.5YB90L-4   1.5      25      25   -40~+80
YQB5-5   1130   5     1.6     0.5YB100L-4   2.2      32      32   -40~+80
YQB10-5   600  10     1.6     0.5YB132S-4   5.5      50      50   -40~+80
YQB10-5A   600  10     1.6     0.4YB112L-4    4      50     50   -40~+80
YQB15-5   780  15     1.6     0.5YB132S-4   5.5      50     50   -40~+80
YQB15-5A   780  15     1.6     0.4YB112M-4    4      50     50   -40~+80
YQB25-5   600  25     1.6     0.5YB132M-4   7.5      65     65   -40~+80
YQB35-5   780  35     1.6     0.5YB160M-4   11      80     80   -40~+80
YQB50-5   551  50     1.6     0.5YB160L-4   15    100    100   -40~+80
YQB60-5   600  60     1.6     0.5YB180M-4  18.5    100    100   -40~+80
YQB80-5   780  80     1.6     0.5YB180M-4    22    100    100   -40~+80
YQB100-5   780 100     1.6     0.5YB200L-4    30    125    125   -40~+80


 




If you are looking for such pumps,welcome to inquiry.
  • Similar Products
Full Page Contact Supplier