Swipe or use the arrows to view product images.
Motor Overloading Protection Thermal Protector
| Price | $0.26 |
|---|---|
| Min Order | 5000 Pieces |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 374 people viewed |
Model NO.:
NDPJ-RBHQ-5
Operation:
Electric Type
Speed:
High-Speed Circuit Breaker
Type:
Circuit Breaker
Function:
Prevent Motors From Damage
Certification:
CCC
Thermal Protector Dimension:
as Per Customer's Drawing
Open Temperature:
Customized
Reset Temerature:
Customized
Competitive Advantages:
Variety of Application
Storage:
Away From Other Humid Material
Trademark:
NIDE
Transport Package:
Pallet Suitable for Sea Transportation
Specification:
customized
Origin:
China
HS Code:
8545200000
Product Description
8AMC series thermal protector is an automatic temperature recovery device. It is installed in series with the motor coil. Therefore, the thermal protector will respond to the temperature change and motor current. The heat caused by temperature and current raise will transmit to bimetallic element. Once the preset temperature is reached, the bimetallic element will react and make contactor cut off. Then the circuit will be cut off. Once the motor temperature decreases to the rated recovery temperature, bimetallic element will recover to the initial station. Then the contactor will close and the circuit will reconnect.
Temperature specification
Open temperature: 80~160±5ºC, one gear per 5ºC
Reset temperature: it is 2/3 of standard opening temperature or specified by customers. The tolerance is 20ºC.
Contact capacity
They are applicable for more than 5000 cycles under following condition.
Notice:
The thermal protector can not sustain heavy impact during working.
The word side is the temperature sensing surface.
Information needed for thermal protector inquiry
It will be better if customer could send us detailed drawing including below information.
1. Thermal protector dimension: length, height, width, tolerance, lead wire length.
2. Thermal protector open temperature
3. Thermal protector recovery temperature
4. Thermal protector applications
5. Required quantity
6. Other technical requirement.
Temperature specification
Open temperature: 80~160±5ºC, one gear per 5ºC
Reset temperature: it is 2/3 of standard opening temperature or specified by customers. The tolerance is 20ºC.
Contact capacity
They are applicable for more than 5000 cycles under following condition.
| Voltage | 24V-DC | 125V-AC | 250V-AC |
| Current | 50A | 50A | 25A |
Notice:
The thermal protector can not sustain heavy impact during working.
The word side is the temperature sensing surface.
Information needed for thermal protector inquiry
It will be better if customer could send us detailed drawing including below information.
1. Thermal protector dimension: length, height, width, tolerance, lead wire length.
2. Thermal protector open temperature
3. Thermal protector recovery temperature
4. Thermal protector applications
5. Required quantity
6. Other technical requirement.
- Similar Products