Swipe or use the arrows to view product images.
Online Gas Detector Oxygen and Carbon Dioxide Dual Meter Analyzer for Laboratory
| Price | $1000.00 |
|---|---|
| Min Order | 1 Set |
| Availability | In Stock |
| Shipping From | Chongqing, China |
| Popularity | 594 people viewed |
Model NO.:
MST-YW-300
After-sales Service:
Whole Life Technical Support
Warranty:
Warranty Is 12 Months
Brand:
J&X
Customized:
Customized
Portable:
Non Portable
Gas:
O2
Sample Gas Components:
Oxygen O2, Carbon Dioxide CO2
Pressure:
Sample Gas Pressure Negative Pressure or Slightly
Particles:
Trace; Moisture Content 10%-50%Vol
Compressed Gas Source:
Compressed Air 0.7MPa, Nitrogen 0.6-1MPa; Purity 9
Exhaust:
External, Normal Pressure or Negative Pressure Rec
Operating Temperature:
Above 70ºC, Maximum Temperature 400ºC
Output Signal:
: 4~20mA
Detection Range:
Oxygen 0-21%Vol; Carbon Dioxide CO2 0-10%Vol
Trademark:
J&X
Transport Package:
Wooden Case
Specification:
600*600*1600mm
Origin:
China
HS Code:
9031809090
Product Description
Online Gas Detector Oxygen and Carbon Dioxide Dual Meter Analyzer for Laboratory
I. General Principles
This solution is applicable to the online monitoring system of oxygen and carbon dioxide concentration in the environment of Party A's equipment. This system can sample and detect the concentration of oxygen and carbon dioxide gas in the production process in real time, and provide the detected gas content to the user in the form of 4-20mA current signal, which is used to realize automatic control and analysis of system process, etc.
II. On-site conditions
1. On-site power supply: 24VDC, 220VAC;
2. Sample gas components: oxygen O2, carbon dioxide CO2
3. Pressure: sample gas pressure negative pressure or slightly positive pressure less than 3KPA
4. Particles: trace; moisture content 10%-50%vol
5. Compressed gas source: compressed air 0.7MPa, nitrogen 0.6-1MPa; purity 99%
6. Exhaust: external, normal pressure or negative pressure recovery pipeline;
7. Operating temperature: above 70ºC, maximum temperature 400ºC;
8. Ambient temperature: normal temperature 20-40ºC.
Note: The above data is provided by the customer on site
III. On-site requirements:
1. Output signal: 4~20mA,
2. Detection limit: 0.1%, ±1%;
3. Detection range: oxygen 0-21%VOL; carbon dioxide CO2 0-10%VOL
4. Explosion-proof requirements: explosion-proof is not required;
5. Measurement purpose: to determine the oxygen and carbon dioxide concentrations in the environment of the equipment when it is turned on
6. Spare parts: standard;
I. General Principles
This solution is applicable to the online monitoring system of oxygen and carbon dioxide concentration in the environment of Party A's equipment. This system can sample and detect the concentration of oxygen and carbon dioxide gas in the production process in real time, and provide the detected gas content to the user in the form of 4-20mA current signal, which is used to realize automatic control and analysis of system process, etc.
II. On-site conditions
1. On-site power supply: 24VDC, 220VAC;
2. Sample gas components: oxygen O2, carbon dioxide CO2
3. Pressure: sample gas pressure negative pressure or slightly positive pressure less than 3KPA
4. Particles: trace; moisture content 10%-50%vol
5. Compressed gas source: compressed air 0.7MPa, nitrogen 0.6-1MPa; purity 99%
6. Exhaust: external, normal pressure or negative pressure recovery pipeline;
7. Operating temperature: above 70ºC, maximum temperature 400ºC;
8. Ambient temperature: normal temperature 20-40ºC.
Note: The above data is provided by the customer on site
III. On-site requirements:
1. Output signal: 4~20mA,
2. Detection limit: 0.1%, ±1%;
3. Detection range: oxygen 0-21%VOL; carbon dioxide CO2 0-10%VOL
4. Explosion-proof requirements: explosion-proof is not required;
5. Measurement purpose: to determine the oxygen and carbon dioxide concentrations in the environment of the equipment when it is turned on
6. Spare parts: standard;
| Category | Parameters | Technical Specifications |
| Working conditions of the whole system | Power supply voltage | 220VAC/24VDC, |
| Air pressure | Above 0.5MPa, not exceeding 1MPa | |
| Pipeline sampling port | 8mm quick-release jack 1 | |
| Pretreatment box | 600*600*1600, equipped with oxygen analyzer, carbon dioxide analyzer, and pretreatment components (see the pretreatment accessories list for details) | |
| Oxygen content analyzer Paramagnetic type | Gas name: oxygen gas analyzer Detection gas: O2 Measurement range: 0-21%VOL Resolution: 0.1% Response time: T90<30S Output signal: 4-20mA Power supply voltage: 220VAC/24VDC, | |
| CO2 infrared analyzer | Gas name: infrared analyzer Detection gas: CO2 Measurement range: 0-10%VOL Resolution: 0.1% Response time: T90<30S Output signal: 4-20mA Power supply voltage: 220VAC/24VDC, |
- Similar Products
Negotiable
1 Piece (MOQ)
Gnl-2100L Portable High Purity Oxygen Analyzer
SHANGHAI CHANG AI TECHNOLOGY & DEVELOPMENT CO., LTD.