Swipe or use the arrows to view product images.
Rapid Cure Hot Spray Polyurea Coaing for Foam Sculpture
| Price | $5.50 |
|---|---|
| Min Order | 840 kg |
| Availability | In Stock |
| Shipping From | Shandong, China |
| Popularity | 272 people viewed |
Model NO.:
JHSW-8616
CAS No.:
Compound
Formula:
Polyurea
Color:
Optional
Appearance:
Liquid
Method:
Spray
Certification:
ISO14001, RoHS, ISO9001
Substrate:
Steel
Components:
Film Forming Matter
Formation Mechanism:
Conversion Type
Trademark:
polysv
Transport Package:
200L Drum
Specification:
A side 220 kg, B side 200 kg
Origin:
Qingdao, China
HS Code:
3909301000
Product Description
Advantages:
- Fast cure, short down time, no sagging
- 100% Solids, No VOC's, Odorless, No Toxic Vapors
- Good resistance to a wide range of chemical attack
- High impact and Abrasion Resistance
- Good weather ability
- High hardness, better protective for foam sculptures.
JHSW8616 Rapid Cure Hot Spray Polyurea Coaing for Foam Sculpture can be widely used for protection of the foam sculptures, it will make the foam sculpture better impact resistance, anti-abrasion, and scratch resistant.
Properties:
| Tensile Strength /MPa | ≥20 | Solids Content/% | 100 |
| Elongation/% | ≥50 | VOC | 0 |
| Tear Strength/( N/mm) | ≥70 | Gel Time/s | 11-13 |
| Shore Hardness | ≥55D | Tack Free/ s | 20~30 |
| Adhesion /(Pull off, concrete,MPa) | ≥2.5 | Shelf Life | 12 months, unopened at 0~40 ºC |
| Density/( g/cm3) | 0.95~1.05 | Flash Point/ ºC | >100 |
| Abrasion Resistance /(GB/T 1689-1998, cm3/1.61km, g) | ≤0.04 | Mix Ratio V/V | 1: 1 |
| Impermeability(0.3MPa/30min) | Impervious | Recommended Spreading Thickness/mm | 2~3 |
| Chemical Resistance | No corrosion, No Blister, No Spalling | Colors: | Optional |
- Similar Products