Regenerative Push Steel Furnace

Technical parameter
1 Furnace type: end in and side out regenerative push steel heating furnace
2 Use: billet heating, billet specification 100x100x3000
3 Furnace operating temperature :1200ºC(billet temperature 1150ºC)
4 Energy: Natural gas 8783X4.18KJ/m3
5 Furnace size: 26000(effective length)x3600(width)x1400(lower heating section) +1200 (upper heating section)
6 Production capacity: 20t/h
7 Heating form: air single heat storage
8 Others: single row of cloth, three zones of automatic temperature control, furnace bottom pipe using water cooling. The feed is a steel pusher.
Two structure and scheme description
The push-steel reheating furnace consists of a furnace body, a furnace door, a combustion device, a circulating fan, a waste discharge system, a furnace bottom pipe, a furnace door seal, an electrical instrument control system, etc. The combustion devices are arranged on both sides of the furnace. Adopts air single regenerative burner.