Swipe or use the arrows to view product images.
Rvz-10/630 II 10kv Indoor High Voltage Rvz Disconnector Switch
| Price | $350.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 292 people viewed |
Model NO.:
RVZ-10/630 II
Type:
High-voltage
Structure:
Three-column Disconnector
Installation:
Indoor High-voltage
Operation:
Manual
Grounding Mode:
Grounding
Movement Mode:
Oscillating Type
Number of Poles:
Three Pole
Grounding:
Single Ground
Series:
Three
Run:
Swing
Switching Mode:
Single Throw-in
Common Model:
RV
Structure of Operating:
Manual
Certification:
IS9001
Brand:
Custom-Made
Rated Current:
400, 630, 1000A
Nominal Frequency,:
50/60 Hz
Degree of Protection:
IP00
Rated Voltage:
10/12kv
Trademark:
ZGHQDL
Transport Package:
Carton Packing
Specification:
700*470*240
Origin:
China
HS Code:
8536500090
Product Description
They are designed for switching on and off circuit sections with voltage up to 10 kV and rated current 400, 630 and 1000 A. High-voltage disconnectorsPV, RVZ, RVFZ, RVO, are used to create a visible break separating the equipment removed from the work from the conductive parts,
which are energized. The disconnectors do not have any inductive devices and are therefore intended for switching on and off electrical circuits in the absence of load current.
- pre-shipment setup and adjustment;
- accurate actuator settings without disassembly;
- MGB lock mounting bracket with the possibility to install a ZB type lock; - increased corrosion resistance of the contact knives;
- special packaging to prevent condensation and rust.
Contact breaker system with visible circuit breakage.
Mechanical interlocking of the actuators.
Current-carrying elements made of high-quality M1 copper.
Built-in, welded construction of the disconnector made of high-quality M1 copper.
Built-up, welded construction of the disconnector.
Wide range of versions: rated current, number of poles, and position of earthing legs.
which are energized. The disconnectors do not have any inductive devices and are therefore intended for switching on and off electrical circuits in the absence of load current.
- pre-shipment setup and adjustment;
- accurate actuator settings without disassembly;
- MGB lock mounting bracket with the possibility to install a ZB type lock; - increased corrosion resistance of the contact knives;
- special packaging to prevent condensation and rust.
Contact breaker system with visible circuit breakage.
Mechanical interlocking of the actuators.
Current-carrying elements made of high-quality M1 copper.
Built-in, welded construction of the disconnector made of high-quality M1 copper.
Built-up, welded construction of the disconnector.
Wide range of versions: rated current, number of poles, and position of earthing legs.
Parameter name | Significance |
| Number of poles | 1, 3 |
| Rated voltage, Unom/Unr, kV | 10/12 |
| Rated current, Inom, A | 400, 630, 1000 |
| Thermal resistance limit current, It, kA | 400 А - 16 630 А - 20 1000 А - 31,5 |
The current of electrodynamic withstand, Id, kA | 400 А - 41 630 А - 52 1000 А - 80 |
| Electrical resistance of the main circuit of the loop, Ohm | 104х10-6 |
| Nominal frequency, Hz | 50/60 |
| Climatic version | U3, UHL2 |
| Degree of protection | IP00 |
- Similar Products
$30.00
100 Pieces (MOQ)
Hgw9-12-630A /Isolator Disconnector Switch
Zhejiang Zhongneng Electrical Co., Ltd.