Audited Supplier
RVZ-10/630 II
High-voltage
Three-column Disconnector
Indoor High-voltage
Manual
Grounding
Oscillating Type
Three Pole
Single Ground
Three
Swing
Single Throw-in
RV
Manual
IS9001
Custom-Made
400, 630, 1000A
50/60 Hz
IP00
10/12kv
ZGHQDL
Carton Packing
700*470*240
China
8536500090
Product Description
They are designed for switching on and off circuit sections with voltage up to 10 kV and rated current 400, 630 and 1000 A. High-voltage disconnectorsPV, RVZ, RVFZ, RVO, are used to create a visible break separating the equipment removed from the work from the conductive parts,
which are energized. The disconnectors do not have any inductive devices and are therefore intended for switching on and off electrical circuits in the absence of load current.
- pre-shipment setup and adjustment;
- accurate actuator settings without disassembly;
- MGB lock mounting bracket with the possibility to install a ZB type lock; - increased corrosion resistance of the contact knives;
- special packaging to prevent condensation and rust.
Contact breaker system with visible circuit breakage.
Mechanical interlocking of the actuators.
Current-carrying elements made of high-quality M1 copper.
Built-in, welded construction of the disconnector made of high-quality M1 copper.
Built-up, welded construction of the disconnector.
Wide range of versions: rated current, number of poles, and position of earthing legs.
which are energized. The disconnectors do not have any inductive devices and are therefore intended for switching on and off electrical circuits in the absence of load current.
- pre-shipment setup and adjustment;
- accurate actuator settings without disassembly;
- MGB lock mounting bracket with the possibility to install a ZB type lock; - increased corrosion resistance of the contact knives;
- special packaging to prevent condensation and rust.
Contact breaker system with visible circuit breakage.
Mechanical interlocking of the actuators.
Current-carrying elements made of high-quality M1 copper.
Built-in, welded construction of the disconnector made of high-quality M1 copper.
Built-up, welded construction of the disconnector.
Wide range of versions: rated current, number of poles, and position of earthing legs.
Parameter name | Significance |
| Number of poles | 1, 3 |
| Rated voltage, Unom/Unr, kV | 10/12 |
| Rated current, Inom, A | 400, 630, 1000 |
| Thermal resistance limit current, It, kA | 400 А - 16 630 А - 20 1000 А - 31,5 |
The current of electrodynamic withstand, Id, kA | 400 А - 41 630 А - 52 1000 А - 80 |
| Electrical resistance of the main circuit of the loop, Ohm | 104х10-6 |
| Nominal frequency, Hz | 50/60 |
| Climatic version | U3, UHL2 |
| Degree of protection | IP00 |
