Menu
Global B2B sourcing platform
Verified suppliers and manufacturers

Sid Dryer: An Upgraded Version Of The Flash Dryer

Price Negotiable
Min Order 1 Piece
Availability In Stock
Shipping From Liaoning, China
Popularity 263 people viewed
Model NO.:
undefined
After-sales Service:
Debugging and Training
Warranty:
1 Year
Heating Mode:
Convective
Material Status:
Powder
Drying Medium:
Air
Operation Pressure:
Atmospheric Pressure
Instantaneous Drying:
Drying Duration 1~5 Seconds
Uniform Quality:
Product Without Over-Heated
Closed System:
The Recovery Rate Is Greater Than 99%
Direct or Indirect Heating:
90 to 600 Degrees Celsius of Hot Air
Initial Moisture Content:
More Than 85%,
Final Moisture Content:
Less Than 0.5%
Trademark:
DONGDA POWDER ENGINEERING
Transport Package:
Suitable for Shipping
Specification:
The output can reach several tons
Origin:
Benxi, China
Product Description
Sid dryer

Brief introduction:
   Sid dryer is an updated version of the flash dryer. Which can get over some drawbacks of the general drying equipment, such as material sticking; enhance the utilization efficiency and the output-cost ratio of the equipment sufficiently.

Performance:

1. Flash drying: Dehydration for 1 to 5 seconds, resulting in an even granularity.


2. High collection rate: ≥ 90%.


3. Direct or indirect heating: Hot air ranging from 90 to 600 degrees Celsius.


4. Energy consumption: 1,100 to 1,200 kcal/kg H2O. Water evaporation capacity per set ranging from 90 to 3200 kgH2O/h.


5. Applicable for filter cake and paste materials with an initial moisture content of ≤ 85% and a final moisture content of ≤0.5%.


6. Requires small floor space and minimal labor involvement.


Process:

  
The flash drying system comprises a heater, a feeder, a desiccation chamber, and a cyclone collector. The

moist material is fed into a spiral feeder that conveys it to the drying chamber. Rotating blades are

positioned at the bottom of the drying chamber to disperse the material inside effectively. Simultaneously,

the heated hot air rapidly dries out the dispersed material, transforming it into granules. The swirling hot

air carries these granules through a cone-shaped sieve that rebounds some of the larger ones onto the

rotating blades, while the remaining smaller grains enter the collector. Finally, an induced draft fan expels the

exhaust.



Industry Application:

  
Chemical industry, mining industry, construction, pharmacy, pigment industry, metallurgical industry, etc.

Specifications:

Application examples:
 
  1. Gansu Jinchuan Nickel Oxide drying.
  2. Guangdong Lianjiang Kaolin drying and calcining.
  3. Indonesia Phenol phthalein blue dye drying.
  4. Jiangxi Zinc Oxide drying.


Pictures at application sites:










 

 

  • Similar Products
Full Page Contact Supplier