$600.00
40 Pieces (MOQ)
Drilling Fluid Additive-Thinner-High Temperature-Ssma-Thermothin
Shark Oilfield Services Ltd.
Swipe or use the arrows to view product images.
Silver Paste for Capacitors with High Shear Strength and Conductivity
| Price | $0.86 |
|---|---|
| Min Order | 100 gram |
| Availability | In Stock |
| Shipping From | Guangdong, China |
| Popularity | 450 people viewed |
Model NO.:
Lx-Tc5001
Application:
Electronics, Tantalum Capacitor
CAS No.:
7440-22-4
Purity:
50+-2%
Brand Name:
Longxin
Other Names:
Tantalum Capacitor Silver Paste
Place of Origin:
Guangdong, China
Sedimentation Rate(mm/H):
<2.0
Grade Standard:
Industrial Grade, Electron Grade
Shear Strength(MPa):
>1.0
Viscosity(MPa.S):
400~800
Model Number:
Lx-Tc5001
Trademark:
Longxin
Transport Package:
Carton
Specification:
1kg/can
Origin:
China
Product Description
Model | LX-TC5001 |
Solid content% | 50±2 |
ViscositymPa.s | 400800 |
Volume resistivityΩ·cm | ≤5.0×10-5 |
Shear strengthMPa | ≥1.0 |
Sedimentation ratemm/h | 2.0 |
Shipping solutions for the selected quantity are currently unavailable: We apologize for the inconvenience. Please contact our customer service team to explore alternative shipping options and receive tailored assistance to meet your needs.
Protections for this product: Experience peace of mind with our secure payment options and robust product protection policies. At , every transaction benefits from stringent SSL encryption and PCI DSS data protections. Our easy Return & Refund policy guarantees that if your order is incomplete or has product issues, you are eligible for a refund. Enjoy free local returns on qualifying defective items, ensuring a risk-free purchasing experience.
Foshan Longxin New Material Co., Ltd.
Q: How many days is the price valid for?
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
- Similar Products
$150.00
20 Tons (MOQ)
White Powder 99.5%Min Ammonium Chloride with Lowest Price
Xiamen Ditai Chemicals Co., Ltd.